And that's fine. If you see what I posted as BS and not me being honest, I guess we are a bad fit for you. There are a bunch of other companies out there for just this reason.
Our website takes full payment as a customer deposit when the product is ordered. We are not some fly-by-night...
I would just like to say that when whoever made the actual purchase (your installer maybe?) sent an initial e-mail to customer service when the bumper was received (before it was even mounted) that we sensed they were already highly unsatisfied with the product. At that time we said, please...
Sorry for the delays, we are actually behind on everything right now due to a bunch of factors, some of which is just order volume. We added a second shift of production to help with lead times, but hiring skilled fabricators is a slow process in our area. Pretty big worker shortage in Michigan...
If you loosen all the mounting bolts you should see the holes are all slotted. You may be able to just look at them without loosening any to see if there is any adjustment left for you to move the bumper to the driver side. Because of the design of the 100 (angled frame mounts), there isn't a...
I'm writing this not knowing your full communication with our tech support team. I do know they asked you for some measurements so we can figure out what's up and what our next steps are. These bumpers are built on a jig to make sure they are symmetrical, and we do have some left-right...
Yes on flat towing with the bumper. Blue Ox makes D-ring tab adapters as well as many others:
https://www.etrailer.com/Accessories-and-Parts/Blue-Ox/BX88358.html?feed=npn&gclid=Cj0KCQiAlsv_BRDtARIsAHMGVSY4x03ozMx6jZRwkNwYq3Yxit0WXbreRBn4ZjsFlGDlpgGiavAG450aAp8OEALw_wcB
We do recommend the steel...
They are the best :rofl:
No seriously though, I run them with the screws daily in my Taco without issues. I've removed and reinstalled a few times as well. Don't overtighten the screws and you'll be good. If you'd like more security, rubber well nuts, or machine screws with nuts and washers...
You should be able to just grease at the ports on the bushings without messing with the bolts. Any synthetic silicone grease will work. Don't use petroleum based grease on poly bushings.
I like waterproof Marine grease for exposed stuff like uniballs.
I think you will need to replace the whole steering column shaft.
This is the part diagram for a 03 100 series. Your specific part may be different, but just giving you an example.
45210 specifically.
Power vs manual tilt matters and region may matter too. It would be your best to take your VIN...
LED technology has come a long way, but not sure which brands fit in the housings on the LX projector. The cutoff should stay the same as stock, just more light output. HIDs are great too, but the cheaper ones aren't very reliable as you've already seen. (The Retrofit Source | The Best HID & LED...