Count another one fixed from these great instructions, 2001 LX470, back on the road.
Thanks FJRyder
I used this video to assist in learning how to replace a component with a hot air solder station, I used the one FJRyder recommended.
Good luck on getting the OME 303001 Torsion Bars, I tried for a few months and everyone is out with no supply date, everything else was available including the 860's which I also went with.
Finally ordered some Sway Away torsion bars, they ride similar to the AHC set on Medium. I am also...
D1EZEL is just a name I started using when I has a Dodge diesel way back when.
One other piece of advice, the inner frame plates that have the three small bolts, mount where the spare tire is. These should only be tack welded until you are confident of fit. This mean you will need to add and...
I don't have a write up but please NOTE THE FOLLOWING: you do NOT cut the frame rails back on the 100/470 series as you would an 80, leave it as is when you remove the plastic bumper and supports. Outside of that you can pretty much follow the 80 series write up.
Also, if you are putting on a...
Sounds like a coincidence to me. I removed all of my AHC equipment and had no issues with the VSC warning light. I do have the little (Off) light flashing on the dash but I have hidden that with my Scan Gauge.
I do however, regularly get the VSC warning light with a code that appears every...
The issue was a blown fuse, ecu-b #52 behind the passanger kick panel, 10amp.
It affected the AHC, mirrors, door locks, remote lock, VGRS, VCS and I am sure a few other things.