I have a radius fab snorkel on the way.. plan is to also to get their airbox later on. I'm modifying the stock box for now. When I get the intake box I might also have to reroute over the intake tube.. we'll see when that time comes.
Yup same suggestion from Cabledude.. but no spacer.. I'm running this AC Delco waterpump from Rockauto 252901 (252-901)..
I stand corrected though.. was looking through photos since it's been a while since the swap... the output is still vertical, just a shorter straight vertical and not tall...
I used a later year water pump that exits the front vs up top. My hose goes under the intake. That's an option if you ever want to decide to change it later on.
I have one on order. I like the simplicity of the kit to get this up and running. Waiting for Holley to ship it out any day now, it’s been on back order or they make it when ordered.. Plan down the line is to also run aftermarket gauges as well.
Ok so using the gm ac connector but wired to the Toyota harness to engage the ac compressor.
I haven’t removed the ac wires yet from the ecu. I think I’ll leave the wires there until it can be figured out how to control it via PCM however I have a 2004 so it uses the HVAC to control the ac. I...
speaking of which got a quick question... started to work on my harness again since it’s a rainy day here in Texas... but going of LT1swap site for the pin out he talks about removing the ac connections.. in our setup we’re using them right to run ac?
Use:
pin 43 on the green which is AC...
Anyone have the ewd for 91-92? I got the all data and combing through it. But just wanted to ask while I’m doing this if anyone has the pin outs for those years.
Another option I just saw is drill out the location and tap with a M16 so you can just screw the factory sensor into the ls head instead of dealing with adapters.
What is the resistor mod? I think I might of missed that... I have a 3FE and I think the temp sensor is the same through 97?
Yes, looking up M16 taps. I have the brass adapter.
There was Auto Meter 2277 Oil Pressure Temp Metric Adapter M12 x1.5 Male to 1/8 NPT Female that would fit the LS head but I think the guy that used this had tapped the center to M16 fit the water temp sensor if I remember correctly.
I got mine off amazon for like 15 bucks.