Well yea the truck has a mild 2.5” lift. 5100 and 885s up front and 2” all pro lift coils in the rear and 33s.. And the alignment is good well has been good for 350k+. So in my opinion the aftermarket uppers are junk unless your talking about Total Chaos or the SBC adjustable. I have had both...
So I tried to install the press from the bottom and could not get the correct configuration of spacers to fit my tool. So I used the press from the top same as what was in there. I removed the upper control arm and put it in a vice and installed the press down style. Packed the boot with more...
First off not my first replacement of a ball joint. Dad’s 05 4runner said he had some play in the front end. Truck has 400k I do all the work on it. I have replaced the ball joints a few times upper and lowers. He brings it over with some upper BJ’s I order him awhile back. I determined the...
I have a stock distributer and button, with stock cap and NGK wires with stock coil off my 1985 fj60. All in working condition when I remove them 5 years ago to run the TPI Firecracker kit. I’m located in Ocoee Florida shipping is flat rate either $17 or $20 USPS and $300 for the parts.
Update- I have been driving the truck everyday for the last 2 weeks and have no issues. The JB weld is holding and the head is not leaking coolant. Truck is running good and no issues at the moment.
Alright back on the road windshield installed! I tossed the gasket from CCOT and used a universal gasket it fit great! I duck taped the window in place with the gasket installed. Then I soaped it up and set it in and used the string method to rope it in. I was able to install the window by...
Installing a front windshield and aftermarket gasket from CCOT. I started off having my insurance Handel the replacement. After multiple companies said they couldn’t do it my insurance said they would reimburse me if I did it.
So I took my front windshield to a local glass company. The only...
Oh yea i forgot the best part the as Matt said “New” but it’s new to me head. I used high temp JB weld to go over the the brazed hair line crack it’s mint!
Today I spent some time cleaning my block and installed a nice head gasket from rock auto and new oil pan gasket. And mounted the head I got assembled last night. I did not change out the piston because I’m going to rebuild this motor. What I’m trying to do is get it back on the road so I can...
Update spent some time last night at my man Cruiser Matt’s shop last night re assembling a fresh head he had laying around. And was willing to part with. You know this guy is one awesome individual. Not only is his shop a candy store for parts but he will give you the shirt of his back to help...
Ok so problem solved I pulled the head today and the valve seat for cylinder 4 exhaust port was destroyed and all the yummy pieces have embedded themselves into the top of the piston.
Well it is always nice to be right the first time. I have not check the clearances on the valves I was looking thru my FSM but remember reading somewhere you needed to start at TDC and check exhaust1, 5 and 9 and intake of 2,3 and 7 then rotate 360 and check the others. But I can’t rotate a...