Search results for query: *

Forum search Google search

  1. E

    Rear Locker.....Again

    Just an update to this thread - I pulled the old actuator to try to service it. I broke two bolts trying to get it apart so I just went ahead and installed the new actuator. The rear locker works perfectly now. I am not sure if the old one was just gunked up or faulty but since getting it...
  2. E

    Rear Locker.....Again

    I have a new actuator on the way, I just want to be able to verify it is not an electrical (relay, wiring) issue before I swap the new one in and have the same issue. The lack of the +12V signal to the rear has me stumped. I want to look for the relay wiring diagram to try to see which wires...
  3. E

    Rear Locker.....Again

    Yes, CDL is engaged. I should have stated that earlier.
  4. E

    Rear Locker.....Again

    I have a weekend trip planned for the end of the month and my rear locker is still not functioning properly. I printed a few threads from the Mud forum here and spent some time under my vehicle over the weekend trying to diagnose the issue. It seems I am not getting +12V at the rear plug to...
  5. E

    94 LC - Need O2 Sensors, what are my options?

    My 1994 LC needs the o2 sensors replaced. I am having a terrible time locating the original NTK sensors for this model year. What is everyone doing for replacement o2 sensors for these 93 and 94 engines? Are the Denso sensors the best available option? Also my exhaust is extremely rusty and...
  6. E

    Rear Locker Engagement Issue - Need Help

    I have been having a weird issue with my factory rear locker. For years both the front and rear lockers worked perfectly. A few months ago my rear locker started to not engage and the light would just blink. I replaced the solenoid on the rear locker since it is cheap and easy. On my first...
  7. E

    Parting Out Toyota Landcruiser FJ62 & FJ80 Partout Laughlin Nevada

    I need a rear hatch handle. Mine rusted here in central PA. Any chance you have the handle available?
  8. E

    Parting Out 1993-1994 FZJ-80 One with Lockers

    I need a windshield wiper motor. Is yours still good and if so, how much to 17015?
  9. E

    Wanted WTB - 80 Series front drivers side mud flap

    With flares but without running boards.
  10. E

    Does the 80 series have a low range indicator light?

    I actually have an ABS issue right now so my ABS light is always on. I do not get any indicator lights when I move the transfer case to neutral. Isn't there a light that is supposed to come on then?
  11. E

    Wanted  WTB - 80 Series front drivers side mud flap

    I need a front driver's side mud flap for my 80 series. Please let me know if you have one you would be willing to part with. Thanks.
  12. E

    Does the 80 series have a low range indicator light?

    In my LC I do not have any indicator lights that light up when I pull the transfer case handle back into 4 lo. I am assuming there should be some type of indicator. Is there an indicator light on the dash somewhere for 4 lo? Also when my center diff is locked I get the center diff light to...
  13. E

    Do I Need My Front End Rebuilt?

    Alright guys, I will start my research on the rebuild. For tihose who have already done it, how difficult is it? What is the best place to get the necessary parts and about how long should it take? What grease do I need right now for the axles and diff to get me by until I can get the rebuild...
  14. E

    Do I Need My Front End Rebuilt?

    I bought this LC about 8 months ago and have done a few things to it. A few days ago I looked under it and found this on the inside of the front driver's side tire. Based on these pictures would you recommend a front end rebuild and is there any way for me to check/add grease to be sure I do...
  15. E

    Wanted  WTB - 80 series front bumper and drivers front mud flap

    I need a new front bumper with the mounting arms and also a non running board front driver's side mud flap. I am located in central PA. Thanks.
  16. E

    Hi-Lift Mounting Options?

    I have a 94 with stock bumpers and the stock roof rack. On my old 1st gen 4runner I used a few straps and was able to mount it to the rollbar out of the way of the rest of the interior. I would like to mount my high lift on the outside so it is not in the way for daily use inside the vehicle...
  17. E

    Question on E-lockers

    MIne were not engaging either and I tried taking out the switch from the transfer case and "cleaning" it but that did not work. I ended up buying a replacement from amazon since it was $18 compared to the expensive OEM toyota part. My lockers are now totally functional. Advance, Autozone, and...
  18. E

    Post Lift - What to do about EM brake?

    After installing my new lift springs my EM brake cable seems to pull tight when the driver's side of the rear axle droops significantly. What have you guys done to remedy this? It looks like the cable is routed at a goofy angle right before the rear axle. Did you relocate one of the brackets...
  19. E

    Redneck Enginuitive Belly Pan finished!!!

    Since it was/is the intent of CreeperSleeper for other mud members to copy what he has done, can any one post up or pm me the dimensions of the mountin plates, crossmember, and the actual skid plates? I know the crossmember is 2x3 box tubing and the plates are all 3/16" material, I just need...
  20. E

    Enlighten me on bumpstop extensions please

    The lift was just finished on Saturday. I am currently still running 265/75-16s. They look so small. I have a set of 315/75-16 treadwright guarddogs on order. They should be here in a few weeks.
Back
Top Bottom