My 97 shorted on the glove compartment lower reinforcement bracket , the edge of the bracket is sharp enough that over time it wears through the insulation. I found it quick by moving the harness around with the engine idling.
Max warpage 0.15mm (0.0059 “) if warpage is greater discard head 😁
Cam journals are machined and line bored when the head was flat, your machine shop should have advise you to find a new head !
You shouldn’t machine a warped overhead cam head unless the manufacturer states a specification. The...
You Special order in non stocked hoses and now you’re just gonna return them after you use them at a parts store to match up. Hopefully they have a 90% restocking fee !
Before removing the skid plate, If the bolt is centered in the hole of the skid plate , i would size a drill bit shank to the skid plate hole and start to drill the bolt with the larger bit. Drill into the center of the bolt enough to keep a smaller drill bit from walking out of the center of...
You select xm using the am button, it will give you 18 preset channels. No it doesn’t have lifetime subscription. Lexus also offered an Ipod adapter (30 pin), you could only add the ipod or the xm, not both.
My 09 ML has the OE accessory XM module, the module is installed in the left rear side compartment and the antenna is mounted on the roof in the center just in front of the wing . This was a dealer installed option, it was never installed in the glove box according to the install instructions.
If you look at your passenger seat you posted, the bottom rear panel where your butt sits and the lean back lower panels do not exactly match the other face panels, you can see the color difference. It could be that an upholstery shop has replaced those panels due to wear or the mismatch...
In regards to the seats, maybe those are re upholstered. The drivers seat side bolster has a poor fit with all the wrinkles to be OE. The passenger seat stitching on the bottom looks a little wavy on the flat insert. Perhaps these were made by Shane ?