Hi @B y r o n , I've tracked them all down locally, except for 95332-06010. Can anyone confirm the ID so I can just get a fuel hose from a local spot? My research says 5/16" aka 8mm. Is it the same as 95332-06020 and 95332-06030?
Also, I'm still new to the car game and this diagram is a bit...
Sorry for late response, I didn't actually get a notification about this post for some reason. I saw it last night. I took your hunch and double checked the hose, I think it is probably the issue, as you may concur with from the photos below. Its quite decrepit around the end. I should really...
Can someone please tell me what these hoses are for? I've tried to answer it myself but can't. I assume the first two are fuel related.
The photo is off my 84 FJ45, passenger side (right), under the fueling port.
I've realised 2-6 are all cracked and need replacing, so can someone help with the...
Thanks @45Dougal, that's a great walkthrough. There should a forum section called 'walkthroughs for dummies' for the novices like myself.
A couple of basic questions if you don't mind...
As I prepare, are there any parts you recommend I replace regardless of condition, other than the crush...
Hi guys, just came across this post as I have the same issue and am trying to blueprint the plan in my head. I'm still a novice so photos would be most helpful, but I can't understand where the silicone is going when mentioned above? I also don't know the purpose of it which would probably help...
Late response, but back from my trip and getting back into the project from tomorrow.
Thanks for the input, I think I will get the essentials done and register it so I can drive, and will then do the seals on the transmission and RMS in one go when driving season ends. So I take it the general...
Thanks @aging fleet , good flywheel info. So you would suppose mine looks clean enough to not suspect a rear main leak in this case? That's a relief.
@charliemeyer007 It could be the hose, I'll attach a photo. Slightly aged in the outside, but I'd be surprised if it is that grotty on the inside...
Hi gang. Just want to say a quick apology to anyone that has answered on my previous posts. Life suddenly got in the way this year and kept me from the tank, but I'll be back in the game next month and will follow up on every post I started. I definitely appreciate all your help.
As I'm getting...
Those are all issues I will look at and tune, but would the pedal adjustment or pushrod settings issues that would allow huge amounts of air into the system?
Looking at the left front and rear brakes, it seems likely the cylinders are the issue. There is almost no movement on the left rear and no movement at all on the front left when brake pedal is pushed. The front left brake was pushing out against the drum , which is why it overheated during...
Hello, it has been a while as life has gotten in the way, but I'm back in the game. I got a kit to bleed the master cylinder and it looked fine, it's also new so I doubt the internal parts have any damage. Booster also new. But the brakes are still full of air that won't bleed out.
- Again, I...
Hello wise ones, I need guidance. If you can't tell me the issue, then a systematic approach to troubleshooting would be great, thank you.
I recently bought my FJ45 and let's just say the brakes are a conversation piece. In general, the maintenance of this vehicle was not been upheld or done...
The trim code is KC81. I have seen the thread looking for trims and other numbers so I will post there once I know the truck a bit better, in case I learn a bit more of its history.
Cheers. I think I might completely replace them anew, as many of the leaves are flat, worn or missing, so I can't be sure of consistent age or quality throughout the set. Do people tend to buy single leaves second hand? Wondering if it's worth me sticking them online for someone to reuse.