Search results for query: *

Forum search Google search

  1. Brayden3223

    No brakes when engines cold!!!

    I feel attacked 😂 Nah I appreciate it, is there any other things I should do when the intake manifold is off? And is it just the 2 rear bolts that need to be done from underneath?
  2. Brayden3223

    No brakes when engines cold!!!

    I’m hoping it’s something simple, the only vacuum lines I haven’t really looked at, at this point is the ones under the intake manifold because I don’t know how to get it off, few bolts on there are hard to reach
  3. Brayden3223

    No brakes when engines cold!!!

    Yeah, I disconnected it from the intake manifold, I know I would have no brake assist when it’s disconnected but I just wanted to confirm that, that wasn’t causing the poor idle, as it seems the 2 issues correlate
  4. Brayden3223

    No brakes when engines cold!!!

    I did think that, the only reason I lean away from this is, I disconnected the whole brake vacuum line and blocked it and it didn’t change my idle or how it ran at all
  5. Brayden3223

    No brakes when engines cold!!!

    When my engine is cold I have no brakes assist, it’s bloody scary. Feels like it’s almost impossible to get the car to pull up but I don’t believe it’s anything to do with the brake booster, I have a FZJ80 Aussie spec and the same day the brakes stopped working properly the engine also started...
  6. Brayden3223

    Cdl actuator separation help

    Got it off, just needed a few solid hits with a mallet to loosen it
  7. Brayden3223

    Cdl actuator separation help

    Gday people, just a quick one, anybody got any solid advice to seperate the actuator for the cdl from the transfer case, got all the bolts off but can’t get it to budge for the life of me
  8. Brayden3223

    1FZ-FE intake Manifold Broken Sensor Inquiry

    Yeah I’m wondering if it would make a difference for me, apparently it can affect the IAC and my car idles like absolute rubbish
  9. Brayden3223

    1FZ-FE intake Manifold Broken Sensor Inquiry

    Is this actually needed? Mine was broken off when I bought the car and put a straight barb in it. Should I buy a replacement one or keep the barb in there?
  10. Brayden3223

    Rough as guts Cold Starts, 26lt/100km

    update: just had a 5 hour drive, idle has gotten worse, can see heaps of vibrations under the hood at 2000rpm. if car is cold it wants to stall and it feels like the brakes arent taking any vacuum, seems to be brake fine when warm. lacks a large amount of power, had to go 4low in 1st gear to...
  11. Brayden3223

    CDL won’t engage at all

    Yeah I’ve sussed out that fuse and it was still good, I replaced it anyway though. I’m gonna source another transmission relay to test and see how that goes
  12. Brayden3223

    CDL won’t engage at all

    Would this switch stop power running to the actuator?
  13. Brayden3223

    CDL won’t engage at all

    I have given it a bit of a work out to see if it will unstick but nothing had happened, it also appears those no voltage at the plug feeding the actuator leading me to believe it’s something else
  14. Brayden3223

    CDL won’t engage at all

    Ah cheers, I was unaware of that. Does anyone know the testing procedure for the Relays? I’ll test those next and if they fail I’ll suss out a new one
  15. Brayden3223

    CDL won’t engage at all

    Alright I’ve tested at the plug, 0V, so no power is going down there, disconnected neutral switch and the relay will still click with that disconnected. Is that normal? Also would I be now leaning more towards a dud relay than a actuator
  16. Brayden3223

    CDL won’t engage at all

    cheers. ill test this weekend and if it doesnt run ill drop it out and repair or replace.
  17. Brayden3223

    CDL won’t engage at all

    you are an absolute legend for this and for the other photo. this weekend ill put some power to it along with testing to make sure power is even getting there in the first place.
  18. Brayden3223

    CDL won’t engage at all

    Im hoping it isnt as it sounds like a pain of a job. is there any way i can put power directly to the actuator to test if it will turn or not? im also curious whether its worth connecting the hazard button to the plug behind the dash to round out all probable causes but id assume that button...
  19. Brayden3223

    CDL won’t engage at all

    Gday you brilliant minds, just out here with another issue with the Ol 97’ FZJ80. Found out the other week while on a track that my CDL won’t engage when put in low (I don’t have CDL button) I’ve replaced the switch on the front of the transfer case as I found this damaged and tested it, the...
  20. Brayden3223

    Rough as guts Cold Starts, 26lt/100km

    yeah the brake booster has no leaks at all and holds vacuum fine
Back
Top Bottom