I have a 67' FJ-45 and need to get a good pair of front turn signal housings. The threaded studs that mount to the fender have been cut off. Give me a call at 208-922-2992 if you have a good pair that will fit. Thanks.
Mike
I used a die grinder with a cut off wheel. Pretty clean looking. I will try a mid 70's mini truck booster and master, that had the front disc brakes. I will make my own plate to use the 4 bolts.
I have a 67 FJ-45 with a disc brake 40 front end now. I need to get a booster and master cylinder for it. What will interchange and work for me. Years, make, model, etc. I have been told that I can use a 77' ish booster from a mini p/u, but cannot use the master cylinder. I already had a booster...
Seems to be intact and preety good, for a modication. Has a bunch of silicone around the edges. If you would like to come and see it, drop me an email.
m5moore@msn.com
Has original air cleaner and radiator in back as you can see in the snow. Everything is here to make it complete again. Take the top off and toss it if you like. Transmission shifts on the floor, transfer case is intact and good, front and rear differentials are complete. Has original locking...
I have a 1966 FJ-40. It is a project however, non running. The engine is still under the hood, but the head and rest of it is in the front seat. The hard top has been cut and shorened to the back of the front seat. Has some rust below the rear barn doors. Left rear quarter has a small tear in...
I have a 67' FJ-45 with a 76' FJ-40 disc brake front end. I did a spring over and still need to finish the steering. I need to get a raised steering arm to get up above the springs. I am running a saginaw power steering gear. Do I need both sides to have the raised arms or just the passengers...