here are the pictures. Also I forgot to list that the mileage is 86103. I have also posted it on craigs list asking 7000.00 only because that is what I have into it, but I know how that goes, so I am flexiable on the price.
Thanks,
Nate
I have a 12/74 FJ40 that I had dreamed of turning into the ultimate hunting rig but uncle sam say's its time to go and I can't bring her with.
2F engine
mallory electronic ignition
saginaw PS conversion
4" lift (not sure of the make of shackles, PO did them)
35" BFG mud terrains (two rear are...
I have a 1974 fj40 with 2f, weber 38 dges, and a mallory electronic ignition (all from po). A little history, two months ago she quit running on me. After a little trouble shooting I tracked it down to the module inside the mallory dist. Replaced that and she cranked right up, ended up replacing...
victory! she started. still got to work on the timing but she's running. Just wanted to say thank you to all you guys, you really saved me alot of time and money.
:cheers:
so once I get #1 cylinder where I need it which cylinder should my rotor point to once the distributor is fully seated, #4? If so do I move my wires on the distributor to make this post #1 with the cap on?
I have a 74 fj40 with a mallory series 57 distributor that the po installed. I lost spark and traced it back to this magnetic breakerless ignition module. Got the module replaced and I now have spark the only problem is I had to remove the distributor to get part numbers and I now can't get her...
I recently installed an aqualu tub on my 74 fj40. While I had the body off I removed the old rear cross member and the two angled support pieces because they were rusted through. I didn't want to fork out the money for new ones so I fabbed some out of flat stock and angle. I couldnt get good...
Thanks for the input, I'm stationed in maine with the coast guard. cruiser solutions is where I got the quote from just because they were the closest. From what they told me all of the tubs come from canada by a company called aqualu. It's going to be pretty spendy so I just wanted to make sure...
I'm considering buying an aluminum body tub for my 74 fj40. Anybody had any experience with these? They say it bolts directly on to the frame with no welding.........hmmm. Any input on these would be greatly appreciated.
I recently bought a 1974 fj40 and had to replace the clutch slave cylinder. While replacing it I noticed the bracket it is mounted to appeared to be stipped off from the clutch bell housing. There is another bracket on the drivers side of the bell housing that looks to be in the same shape. I...