Search results for query: *

Forum search Google search

  1. T

    Quick question what direction is the 1st exhaust pipe bracket supposed to face?

    Quick question is this bracket the correct direction or is it supposed to face a different way, I can't remember.
  2. T

    Do Toyota dealerships have a policy only allowing use of oem parts? Insurance; catalytic converter theft woes.

    Update, the insurance company did the right thing and cut me a check that will cover the OEM parts. I wanted to do the work myself, and now I can so the part shopping begins. I had lined up a Toyota dealer that is not a preferred shop and they were willing to help me fight to get the OEM parts...
  3. T

    Do Toyota dealerships have a policy only allowing use of oem parts? Insurance; catalytic converter theft woes.

    What I want to know, is there a umbrella policy for Toyota dealerships only allowing them to install OEM parts for repair jobs on Toyota vehicles? The other day someone crawled underneath my 1997 FZJ80 and sawed off the catalytic converters. Apparently scumbag thieves sell them for scrap metal...
  4. T

    Broke an electrical connector during a head gasket job, need a part #

    During the head gasket job the connector for the front knock sensor (the one right by the oil filter) broke on the harness and I will be needing a replacement. Does any one know the part number for the connector and if unavailable from Toyota is the an alternate source?
  5. T

    Wanted OEM FZJ80 oil pressure gauge

    Thanks, for the replies and those that sent a PM. Got one on the way now.
  6. T

    Wanted  OEM FZJ80 oil pressure gauge

    Looking for a working OEM oil pressure gauge for a FZJ80.
  7. T

    Reddish-brown film in my new radiator! Bad HG or maybe something else?

    Thanks for the replies everyone. There is no oily smell of any kind and I think you are all correct about the rust issue from the many cycle I put through the system. I am a some what ocd, no scratch that; very ocd about some things with this vehicle. Just want it to be the best I can make it...
  8. T

    Reddish-brown film in my new radiator! Bad HG or maybe something else?

    I just got done base-lining a 1997 land cruiser with about 145K miles on it. All new heater and coolant hoses, replaced all the vac lines, new plug wires, plugs, coil, dist cap, rotor, new water pump, new thermostat, rebuilt fan clutch, new oem radiator, and many other items here and there. The...
  9. T

    Water bypass hose clamps, use the stock spring style or use worm drive clamps?

    I am finishing up the process of replacing every single coolant/heater hose on my 97 FZJ80 and was looking at the 3 water bypass hoses on the intake side of the engine (1FZ) and was wondering if there is any reason to use clamps other than the stock spring/clip style? I used constant torque...
  10. T

    Stock rear bumper weight?

    Thanks for the replies, this will help with my weight spreadsheet, so far it looks like I will looking at the 60071 rear and most likely the 2864 rear springs.
  11. T

    Stock rear bumper weight?

    Does any one know the weight of the stock rear bumper along with any associated brackets/hardware that are removed when installing an aftermarket rear bumper? I am looking at several different rear bumpers/tire carrier/jerry can basket/ladder combinations. I know how much these weight however do...
  12. T

    No roar from fan. Should I replace or repair?

    Update. Looks like I will be using a new AISIN blue hub clutch. I drained my Eaton fully but noticed the valve did not open soon enough. So before filling it with my 15k cst oil I decided to adjust the spring, that did not go so well. I ended up ruining the spring. Found a new blue hub for...
  13. T

    No roar from fan. Should I replace or repair?

    I will give the Eaton one shot with the 15k cst fluid. If it works great, if not I will just get a blue hub AISIN and refill like you said. I figured it was worth the $7 gamble (the price of the silicon oil) to try the Eaton at least once.
  14. T

    No roar from fan. Should I replace or repair?

    Yes, sure did. Also kept it warm in the oven to make the oil drain easier as well.
  15. T

    No roar from fan. Should I replace or repair?

    I am going through lots of baseline/PM items right now including the fan clutch. Currently draining my Eaton and am planning to fill with 15K CST oil based on what I have seen posted. Typically 50ml is listed as the proper fill amount for an Eaton. However, I was wondering if any one has ran a...
  16. T

    Transmission temperature sensor thread pitch A442F.

    Does any one know the thread pitch used on the A442F temperature sensor? Searched and found plenty of info about installing a T here for a transmission temperature gauge but the exact thread pitch of the OEM sensor never seems to be called out.
  17. T

    Wanted Stock 16" FZJ80 Land Cruiser wheels with or without tires.

    Got a set of 5 wheels, thanks to all that helped! After vacation I can get these 285/75 BFG KO2 mounted and not have to deal with the 20" .... how should I put this..... "bling bling" wheels the previous owner had on it.
  18. T

    Wanted WTB - 5 OEM FJ Cruiser Alloys

    Saw this on my local Craigslist, not sure if they would ship or negotiate a bit on price but it might be worth a try. https://chattanooga.craigslist.org/pts/5173806733.html
  19. T

    For Sale 80 Series Switches (OR)

    Update, I'll take that diff switch at the posted price pending a question about payment method.
  20. T

    For Sale 80 Series Switches (OR)

    Sent you a message about the diff switch.
Back
Top Bottom