- Location
- United States
So, with great sadness, I think it's time to sell my Taco (3.4l V6). This truck has treated me so well over the last 10 years but, with my 2 year old, I wheel in the Land Cruiser now. This truck is turn-key with no driveability issues. In fact, I drove it to New Hampshire from Colorado last summer. All required maintenance was done. Anything that didn't work right was replaced and it has no rust on the underbody or frame. (I had it undercoated and fluid filmed in winter)
I'm asking $8500, which is about what I have into the truck, just in parts.
Here's my build:
The Lumpskie Build - '96 5-speed
Here are some of the mods:
-Toytec 600lb front Coilovers (these are the 16" coils for a 2nd gen tacoma, giving more travel than typical. I get 11" of travel at the front tire)
-Tundra Bilstein 5100s (Again, longer than the typical Toytec coilover setup)
-Light Racing Upper Control Arms
-ARB Rear Locker
-Front Bumper with removable winch plate, built by me
-Armor - Custom front skid mates to the bumper, IFS skid and belly skid are similar to a Bud Built, but stronger. Also has a gas tank skid.
-Warn M8000 - (not included in list price but can be negotiated)
-Vision X HID Offroad Lights (Hi/Lo beam) - (These lights can be used on the street as they are a bi-xenon setup)
-Alcan Leaf springs - Custom length with Orbit eyes - Rear suspension was totally designed by me. Rear springs come with an extra full and an extra half leaf so you can adjust spring rate for empty/small load all the way up to daily driving with 1000 lbs in the bed.
-Bilstein 7100 12" Short Bodies - you can use almost all 12" of travel of these shocks
-Custom 6" shackles - to work with the Orbit Eye setup.
-Inchworm dual Transfer Case setup, 15º clocking - Rear chain drive case is rotated to create a flat belly. In cab, this is a triple stick setup... I believe the first (if not the only) Tacoma to have this setup
-Bushwacker Fender Flares
-CBI Sliders
-33x12.5 GY Duratracs
-Seats reupholstered - Had the seats rebuilt (including lumbar), refoamed and reupholstered.
- Bluetooth head unit with hand free calling, Pandora radio, etc.
Here are some pictures:
Feel free to post with any questions and comments you have. And thanks for looking.
I'm asking $8500, which is about what I have into the truck, just in parts.
Here's my build:
The Lumpskie Build - '96 5-speed
Here are some of the mods:
-Toytec 600lb front Coilovers (these are the 16" coils for a 2nd gen tacoma, giving more travel than typical. I get 11" of travel at the front tire)
-Tundra Bilstein 5100s (Again, longer than the typical Toytec coilover setup)
-Light Racing Upper Control Arms
-ARB Rear Locker
-Front Bumper with removable winch plate, built by me
-Armor - Custom front skid mates to the bumper, IFS skid and belly skid are similar to a Bud Built, but stronger. Also has a gas tank skid.
-Warn M8000 - (not included in list price but can be negotiated)
-Vision X HID Offroad Lights (Hi/Lo beam) - (These lights can be used on the street as they are a bi-xenon setup)
-Alcan Leaf springs - Custom length with Orbit eyes - Rear suspension was totally designed by me. Rear springs come with an extra full and an extra half leaf so you can adjust spring rate for empty/small load all the way up to daily driving with 1000 lbs in the bed.
-Bilstein 7100 12" Short Bodies - you can use almost all 12" of travel of these shocks
-Custom 6" shackles - to work with the Orbit Eye setup.
-Inchworm dual Transfer Case setup, 15º clocking - Rear chain drive case is rotated to create a flat belly. In cab, this is a triple stick setup... I believe the first (if not the only) Tacoma to have this setup
-Bushwacker Fender Flares
-CBI Sliders
-33x12.5 GY Duratracs
-Seats reupholstered - Had the seats rebuilt (including lumbar), refoamed and reupholstered.
- Bluetooth head unit with hand free calling, Pandora radio, etc.
Here are some pictures:
Feel free to post with any questions and comments you have. And thanks for looking.