Recent content by Wetwillie

Here are more pics. Thanks for your thoughts.

Thanks Everyone! New end links coming!

Hey everyone, I am starting to get a clanking sound going over speed bumps. I went underneath my 2003 LC and found this loose(on both sides) . Is there supposed to be a bushing where the rusty bolt is? I looked online , but can’t find the part. Does anyone know what the part is or part number? TIA

Thanks..

Spoke to the mechanic.. The draw was .55- He said when he pulled the fuse for the ECMB2 that that eliminated the draw. He says that the ECMB2 is the fuse for many other things in the truck and he has to manually unplug 30-40 things to find the culprit- brake booster-radio etc Is there...

Thank you for taking the time to post the link and the info.. I have that HF meter already, so I will do some testing. First thing is unplug the DVD player that has not been used since 2010 .

Thank you for going through the trouble of measuring. Now I have a baseline..

The shop measured the drainage . It was like .5 and the shop said it should be .2 I jumped it with a portable starter pack, started right up. What is circuit leakage? how do you measure it?

Recently my 2003 LC has not been starting after sitting 3 days. it's a healthy battery but when tested with a meter after it wouldn't start only showed 3.5 volts. Brought it to my shop and they pulled all the fuses and finally found a fuse to a control unit? , and said there are 40 more fuses...

My radio (older version) did not have built in CarPlay

I have the wired one- it's a bit erratic, but does work most of the time.

Interesting- my experience with Phoenix was terrible- They NEVER answer the phone- they do not call you back. Took them weeks to send me a new harness after they promised when I purchased that the harness they were including initially was the new one I NEEDED (and asked for) I called...

Thanks.. Makes sense because the extra wire on the switch is green. Much appreciated!

Has anyone tied into their dashboard lights ? I have a switch that fits where the blank is to switch on the fog lights I just installed. I would like the switch to be illuminated when I turn on the dash lights so I need to tap into the power wire for the dash lights. The switch I bought has an...