Recent content by TXtrdPRO

Hi, Is there a wire and plug that connects into the locking mechanism? It looks like it comes off the main wiring bundle in your pic. I am asking because I have a 200 series with an alarm that will occasionally go off in the middle of the night. I THINK it might be a hood locking sensor that...

So I tried the plastic flashing method that this guy on YouTube used... I put my hand over the dash vents with the fan on high and found that the airflow was greatly reduced when I had the flashing on vs off. I was surprised at the amount of suction that AC fan has under the dash when the vent...

@Ironman4x4Bubba I just submitted the reimbursement form on the Ironman website. I had a local Toyota 4x4 shop perform the install/alignment and it came out to approximately $580. How will IM be sending the reimbursement (check in mail, prepaid debit card, etc.) and how long are you anticipating...

Well, apparently I need to read the instructions closer and take off the upper cut portion of the bumper cover. It was a tight fit, but got it on. Instead of going straight on, I “hung” the cradle off the bolts then I rotated the mount cradle downward onto the bolts. Had to hammer it on with a...

Hi everyone, I am in the process of installing an Ironman Premium front bumper for my 2013 Land Cruiser. I was attempting to install the mounting cradle portion to the frame and we cannot get the bolts coming off the frame rails to line up. It's off by approx 1/4 inch on every hole. The lower...

Yeah, I was hesitating disconnecting anything else, but looks like I will have to relieve some tension by disconnecting that last link on the passenger side KDSS and work towards it with the sway bar brackets. Maybe the panhard will then slide into place too. Good call on the ratchet straps...

Ok, after reading all this, watching multiple installation videos, and taking notes, I installed an Ironman FCP 2" lift front and rear over the weekend. The front is complete, but the rear is giving me issues. I removed the sway bar brackets on the rear axle as the OP said to do and in order to...

Hi, I'd like to see more pics of the LC if possible. Does it have a clean title? Any accident history or paintwork? Any rust? Thanks