Recent content by turboFJ80

Tune up TUNEUP, PM me? I'm in southeast metro!

Hey Heckraiser running very similar setup even pass Colorado Air Care! Let me know if you need help or want to see my set up?

Welcome neighbor!

7 Pin trailer plug.

Got my lock box. Loving it!

Here you go! Connector is R2.

Here are some pictures of my install. I sourced power from the other radio plug.

Is that for the power antenna? I did away with mine so cannot confirm.

So a little information would be helpful? Engine type , forward or aft. On my 1994 1FZ-FE most of the intake attachment bolts are 8X125 with the large center support at 10X125. ( see images)

Welcome neighbor!

Oil pan(s) reseal that turn to a rear main seal!! With a stripped flex plate bolt that I had to weld a bolt to get removed. Parts on order. :(

Not stock, 3" SS. Need to take that tip off!

Here a image of my basic system. Mild 6 psi, sucks gas for a reason!

Hello, I also have the Maximum boost book which is how I based my design ( 8 years). Sorry never did a write up, one of those thing I need to do! What I do know is that the OBDI is not tolerant with boost, blew a hole in the #1 piston, even with 2 additional injectors controlled by a Split...

Well I have a 94 with a 95 engine in it. So yes it can be done. I made a patch cable so as not to cut the 95 engine harness and 94 truck harness. there are several sets of wires that must be run as they are not there in the 93-94. Runs awesome with the turbo and of course it passes Colorado...