Recent content by Travis Nichols

If you don't want to spend the big bucks on after market plug wires, you can use chevy big block wires on your sbc. Most are 8mm and have the straight boot.

I used the power set up off a 76 full size blazer. Used the bracket on gm unit and drilled four hoses thru firewall to hang it. Pretty simple.

Planning a saginaw conversion on my 69. Read most of the tech aritcles and the all said a 4.00 or a 4.25 turn box. Have a stock car buddy who has boxes with 2.75 and 3.25. Are these boxes to tight to use on my 69? Mostly street driven, 33's, sbc. Thanks

I used a GM master cylinder on my 69. I just drilled new holes to mount. You'll have to use the GM push rod. The clevis on the brake pedal will have to be drilled and tapped to accept the GM thread. Pretty simple other than switching your brake line ends over to fit the GM master cylinder.

Thanks for the morale boost and the scoop on cdan. why spend fifty, if you can do it for 25.

Thanks

SOR spendy. Who or what is cdan?

Having trouble finding 69 fj40 rear brake hose? Any ideas? Does anything swap with it.