T
Reactions
1

Latest activity Postings About Badges Post areas

    • T
      Thecruiseinator replied to the thread 80 series front Axel pushing out dust cap.
      This makes sense. I ordered longer flanges.
    • T
      Thecruiseinator replied to the thread 80 series front Axel pushing out dust cap.
      From what I understand even though the newer birfields are longer they are far shorter than the "longer" ones. And it doesn't explain as to why the left hand side with the same parts has none of these issues that the right has.
    • T
      Thecruiseinator replied to the thread 80 series front Axel pushing out dust cap.
      This is why j can't figure out why it can slide out. The spindle was bolted tight to the knuckle housing. It shouldn't be able to go any farther
    • T
      Thecruiseinator replied to the thread 80 series front Axel pushing out dust cap.
      I have compared both and they are both the same. From my discussions with the parts supplier today he confirmed I have the narrow flanges. Which is the correct flanges for my birfields
    • T
      Thecruiseinator replied to the thread 80 series front Axel pushing out dust cap.
      I have verified that all my parts are correct. The weird thing is the original birfields are shorter than the new ones by 3/8". The Old are 9 5/8" and the new ones are 9 7/8". I thought for sure this was my problem. However I talked to my...
    • T
      Thecruiseinator replied to the thread 80 series front Axel pushing out dust cap.
      I'm only sure that I ordered the correct birfields. Whether or not I received the correct parts is the question
    • T
      Thecruiseinator replied to the thread 80 series front Axel pushing out dust cap.
      I replaced both the dive flange, the outer Birfield, and the inner axel shaft, all new bushings bearings, and seals. It is possible I have a mix up of some combination of Birfield and drive flange. I will see if there are part# on them...
    • T
      Thecruiseinator replied to the thread 80 series front Axel pushing out dust cap.
      Yes I installed a new circlip. I thought it may have broken but it was fine when I disassembled for inspection
    • T
      Thecruiseinator posted the thread 80 series front Axel pushing out dust cap in 80-Series Tech.
      Hi everyone. Here is a conundrum I am facing. I recently serviced my front axel (ie: replaced axel shafts new bearings and seals.) After driving for the first time I noticed the right side dust cap was missing. After inspecting I could see...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom