Recent content by rbdave

They should, yes. Do you have factory wheels now? These measure 33 in diameter. I took them off of my series 80, that has a 3-in lift. They fit perfectly in there.

8.5 width

Hi guys, just re-geared my truck, posting up the original gears in case any purests need them. Make me an offer.

American racing I believe

Hi guys - 5, 16 inch rims with 295/75/16 Nitto Terra Grappler Tires. 2 of the tires are NEW, the other 3 have less than 1000 miles on them, and have been on the truck one year. Love to find a home for them. $700 sound fair? 6 x 5.5, 3.75 backspace. Dave 858 204 2886

To get max price out of it, I would consider posting on Bring a Trailer .com. I think it will fetch about $11,000

Hi all, Thank you very much for all the advice given. Loads of info, thanks. After more troubleshooting, and stiffening the silicone in the fan clutch, we finally replaced with a Koyo Aluminum core radiator. Now, the truck is totally back to normal. Still, it baffles me, why the copper...

Hi guys, thanks for the help. Had cracking on the plastic top of the original, was NOT overheating. Yes on the chem flush, did test water pump, really covered all the bases. Fan Clutch does appear to be working properly, and the thought from Tools..... the mechanic that put it in did state...

Hi, just replaced my stock radiator in my 1996 series 80, 135,350 miles. I took the rig on a common trip I go on, and I was overheating pretty rapidly on elevation climbs. On the road, or off, after about 3000 feet of climbing, even with limiting rpm's to under 2000, I would still hit 220 on...

Hi, I put an Iron Pig rear on my 80, and it did NOT have any sort of lubrication on the swingout. It did seize up, I was able to fix it, and throwing up a loose recommendation to consider for yours : Drill a hole into the spindle, install a zirk fitting, Lubricate well with Marine Grease ...

I voted for the inline 6

So, i had the same thoughts. The first thing I did was replace window rails. I think I paid $ 240 for all 4. This is the upside U shaped gasket that the glass windows ride up and down in. I stressed about replacing them, finally had a shop do it that knows cruisers. There estimate was $...

Just put in my front and rear double (had to go big) cup holders. http://www.bh3dprinting.com/ Couldnt be happier. Perfect design.

Nice write up. How did you wire this iup? Or was everything, including instructions included? tx

HI Guys, I went to the Rosin see thru visors. Couldnt be happer that I did this. Expensive, but cheaper than the factory visors. If you decide to go this way and call them, remind them of the group buy that was done earlier. They matched it, if I remember correctly, about half off.