Recent content by PlantDriver

  1. P

    The official 1HDT Intercooler thread

    I have a 1HD-FT in my ‘91 HDJ80 and when I added a Safari front-mount intercooler in 2008 I needed to lose the glowscreen. Never been an issue. Also never much below freezing where I live but direct-injection diesels will usually start just fine to well below freezing. You could add a Webssto or...
  2. P

    Building my own pop top

    Hi Luke, I have an '81 HDJ80 with a Campteq top, Front Runner 45 gallon rear tank, a 3rd 20 gallon tank inside, Kaymar rear bumper with a 25 gallon stainless water tank on one of the swingaways, ARB front bumper and winch, ARB fridge, LandCruiser Phil's sliders, dual batteries, etc, and when...
  3. P

    Builds CAMPTEQ's 80 Series Pop top Prototype

    When I can afford it, I'll buy a Ganz GSP-55 55W flexible solar panel and install it toward the rear of the Campteq top. They're so thin - less than 1/4" - that it will be well below the top of the Mac's TieDowns lashing rails Eric welded to my top (and which I use in lieu of a roof rack.) Using...
  4. P

    Builds CAMPTEQ's 80 Series Pop top Prototype

    Weight capacity of Camptech top I weigh 160# and when I walk on the top, it does not sag - there are 1" x 1" tube aluminum "joists" running the short way about 30" on center, and they make the top very strong. Last summer, I had 4 Pelican #1550 cases on the top, at the very front, filled with...
  5. P

    Builds CAMPTEQ's 80 Series Pop top Prototype

    I was CAMPTEC's first (and totally satisfied) customer, and I have two awning mounts, which Eric fabricated and installed: one on the passenger side for my 6' Hannibal awning, and one on the rear, that I installed, for a cut-down Hannibal awning. Dealing with Hannibal is not easy, however. But...
  6. P

    For Sale For Sale: 1995/96 80 Series Turbo Diesel

    Steve bought the truck from the owner of West Coast Cruisers (West Coast Cruisers) who imported it from, I think, Austria. It had a very funky intercooler on it, which Steve replaced the Safari intercooler (I just stuck one on mine and love it.) I can pull steep hills at 65-75 that I'd have...
  7. P

    HDJ81 Brake Upgrade - With Part #s and Pics

    Hand vacuum pump Here's the Silverline MityVac at Amazon, about $50: Amazon.com: Mityvac MITMV8500 Silverline Elite Automotive Vacuum Pump Kit: Automotive
  8. P

    Off-the-shelf starter for 1HD-T, 1HD-FT, 1HD-FTE

    Starter/5-speed Thanks again, Sheldon I've got a mini-truck starter on the way to me, and thanks for the drain tube and boot tip. And thanks for the 5-speed tips!
  9. P

    Off-the-shelf starter for 1HD-T, 1HD-FT, 1HD-FTE

    Some older autos with the pump in the rear can be push or pull-started, but not the Land Cruiser autos. Hence my lust for a 5-speed.
  10. P

    Off-the-shelf starter for 1HD-T, 1HD-FT, 1HD-FTE

    The Starter in my HDJ80 Hi Sheldon, My swap was done by Amauri Nunez. I have two Odyssey batteries and a Wrangler Battery Manager, but the starter is 12V. It says 12V on it. The sticker has the first portion of the P/N missing, but the last 5 are 47081. And hey, got a 5-speed I can buy...
  11. P

    Off-the-shelf starter for 1HD-T, 1HD-FT, 1HD-FTE

    You are the man! Hey Rick, Try calling me at 510-504-5933. Amazing!
  12. P

    Off-the-shelf starter for 1HD-T, 1HD-FT, 1HD-FTE

    I'm stuck in Arizona, near Tucson, with a fried starter on my auto-trans '91 HDJ80 with the 1HD-FT. Stock they were 24V, I'm told, Spector Off-Road says that by the part number on my starter it's a HT starter mated to the 1HD-FT drive gear and they can build one and ship it to me, but if anyone...
  13. P

    SWB 45 Build for Expedition

    Awesome! Hey Scott, Awesome and unbelievable how much you got done in such a short amount of time, half of it with a broken hand! I'm meeting y'all at the north rim of the Grand Canyon - I'm not quite done with a total re-do of my veggie system.
  14. P

    Internal lift pump on my 1HD-FT took a dump

    Redding Fuel Injection Thanks, Rick, I'm going to call them, and I'll report what they say about cost to rebuild, and whether or not they think I can run with just the Walbro, and - if they say I can - for how long. Thanks again - and thanks to Greg and Sheldon at G&S Cruisers for their many...
Back
Top Bottom