Outsane's latest activity

@Guyute The left and right sides of the mount are slightly different. I can mirror the print for RHD. 95% sure it will fit. If not I can always make adjustments

Some reference material Post in thread 'Digital Clock replacement' Digital Clock replacement - https://forum.ih8mud.com/threads/digital-clock-replacement.1364456/post-15998519

As requested here is the plug Designed by @sleepydad69 Made in flexible material, I added .7mm to the height for a good compression fit. https://solvefunction.com/shop/ols/products/70-series-knuckle-plug

There's is a bracket that is included and needs to be screwed in as part of the assembly. Yes tap into the acc power that would usually go to the clock. You can use spade terminals so you don't need to tap anything

Clock replacement in black

@OGBeno I print

@sleepydad69 I do the same and try to keep learning. I will probably take your model and add a little bit so they squish for a good seal. From the picture I saw it looked pretty flush. I will make them in Tpu with a hardness of 95. It's a...

Ok finally found a quick way to change out the IACV (idle air control valve), after a major PM I did on a 94 Fzj80 I had a terrible low idle, after some trouble shooting figured the IACV was giving me issues. I did not want to pull the throttle...

Made it home from our epic trip. Some stats for those interested. Total Miles: - 6118 Fuel Used: - 388.41 Gallons Fuel Cost: - $1,156.40 Average MPG: - 15.75 Best MPG: - 18.1 (I29 NB with a tail wind) Worst MPG: - 6.5 (any of the trails we did)...

A dude on Instagram, @roaminglost looks like he’s on here also.

I always check my locker before heading out. A couple of years ago I was heading out to run the Fordyce trail checked the locker and all was good. Headed down the trail. At the first obstacle the rear locker would not engage. Ran the first day...

I noticed that while putting the wheels back on. On the to do list. After the speed sensor issue is fixed.

Got some goodies! JIS screwdriver set OEM!

Little mountain air time and some filthy dogs.

If you have the stl I can make them from flexible material

I shimmed internally, I need to make more of the shims

@sleepydad69 - Thoughts?

@Guyute I would be happy to make some, I just need the parts to model from.

https://www.amazon.com/dp/B00MBPBY2K?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1 Is the one I use

I am blushing

You can change from KM to MPH, color, language, if it makes sound or not.

This is installed on a 80 series, electrical untis is the same. Untit only needs power and ground for these functions

Will work with 5 to 28v Will work from 5 to 28v

I made a clock replacement for the 70 series. This adds a GPS speedometer Time, date Altimeter Voltage And lots of other features Only needs to be connected to power that used to go to the clock...

Good to know, thanks