Recent content by Mahalol

Another option is to get the clear lens but with the optional yellow cover. It's like $10 per cover? I think it's an inexpensive way to see if you like the yellow or white light better. Although again, the color temperature won't be like buying the actual 3k's. I also have 2 sets of ss3...

You want to go with the 4k amber light. If you search youtube for the ss3 from diode dynamics, they show the 6k with an amber lens swap and the color isn't as yellow. The only time I would do a different temperature color and lens swap is for scene lighting..... 4k amber led with a clear...

I have a 2006 GX and I have been trying to figure out why my ac inverter isn't working. I checked the drivers side fuse, engine compartment fuse and relay. Everything looked good but I swapped them out with known working fuses and relay. My ac button light isn't turning on, however I plugged...

10w-30 and 5w-30 are $20 for the 1 gallon jug if you need to stock up. I noticed recently that the Pennzoil Ultra 10w-30 went up to $31 as their everyday price. I love this oil. Thought I’d pass it along.

DOM tubing seems to be the popular option

Very helpful! Thank you!

Currently going back and forth with a Lexus dealer in AZ. I cannot find the part number and they sent me the wrong one. I was sent diagrams of the fill plug but the one provided was about 10mm in size. The parts dealer cannot go by size "24mm" and he says there is no fill plug/part number in...

thanks! just bought one and sent to some friends

Obviously my opinion is biased, but I would want to ask myself if the radflo stage 2 is $1,000 better? For the $2,800 - $3,000 range it doesn't have adjustable dampening does it? If I was paying that much, I would want that option and the "might as well" comes into play since the price...

And the denso ignition coil on plugs too! Definitely stay away from those in the $18-25 range.

Ahahhaa! Totally got it :p

He can't get shipping information from his vendor? That was the point of my first post.

You should contact the dealer you decided to buy from. When I purchased my set back in November of last year, the shipment/container from Australia took about 2 months including port inspections, delivery to the dealer then 2 day shipping to me. I went through apacheoffroad.com and they always...

In the event you are not able to find the part/part number, here is another alternative .......this option should be just as effective and probably cheaper. I used some Foam Strip Insulation with backing tape found at your local hardware store. When I replaced my old Toyota with a new...

I have worked on Toyota motors and from past experience, you need to take off the bolt in order to remove the dip stick tube. From the diagram, it looks to be the same.