Recent content by L2k

  1. L

    Need Help!!! No movement in 2WD, drives fine in 4H and 4L

    Thanks for the link. Will pick up the Valvoline MaxLife ATF tomorrow.
  2. L

    Need Help!!! No movement in 2WD, drives fine in 4H and 4L

    Thanks for that info. I do recall seeing everything except the fill plug. Done a little research and found one of the lower plugs was for draining and the other allowed you to check the fluid. Probably gonna tackle this job next week. You have any recommendations when it comes to changing the...
  3. L

    Need Help!!! No movement in 2WD, drives fine in 4H and 4L

    You are so correct about the LC. My wife convinced me to get it as a retirement gift to myself after 23 years of honorable service in the military. I had the opportunity to dirve it for about six months until she took it over. Needless to say I never got the chance to really learn it like the...
  4. L

    Need Help!!! No movement in 2WD, drives fine in 4H and 4L

    :bang::bang: KFun740 you just saved me a couple hours of chasing my tail. You simplied 4WD for newbs. Thats exactly whats happening, 4WD shifter in the neutral and nothing happens. Was under the impression I was in 2WD with the 4WD shifter in the neutral position. Let me guess when in the...
  5. L

    Need Help!!! No movement in 2WD, drives fine in 4H and 4L

    Thanks for the response. I will be at it early tomorrow. Will let you know what I find.
  6. L

    A/C blowing cold, then hot, then cold | Replaced fan clutch fluid - same

    Experienced a similar situation last summer. The compressor clutch was out of tolerance. Removed the clutch and a couple of shims. Hasn't had anymore problems. Check the FSM for the correct gap. Worthwhile checking.
  7. L

    Need Help!!! No movement in 2WD, drives fine in 4H and 4L

    Wife tells me occassionally our 2007 LC 100 series would jump to neutral as she slowed down. Test drove and could not duplicate the problem. Did notice a CEL, VSC Trac and VSC off. CEL revealed P0158 code. Swapped Bank 2 O2 sensor which has not resolved the problem. Can clear code and drive...
Back
Top Bottom