Recent content by Howch

PADDO, I know you are the Master of AHC and appreciate your advice very much. I will be taking the car to an Auto-Electrical repair shop tomorrow. What a cool resource-thank you

Thank You

OK Thanks, the front left sensor is newer (less than a year old). That was the first thing I replaced. I suspected that was the issue initially but didnt install the new one using techstream. Is it possible that the code is from the original sensor?

What is the procedure to verify and adjust sensor placement or can you direct me to a page with this info? Thanks

Ok, a few things I did adjust the torsion bars and got the front down, it was still rough but better. This morning I removed and reinstalled the front height control sensors. I adjusted them (making them a bit longer). Reinstalled them and the car seemed to level itself when I started it. It...

Ok Will do. Thanks for your time.

And thanks for the replies earlier I have not looked at the torsion bars or manually adjusted the sensors. I will attempt to do this tomorrow.

I just measured the old height sensors and they appeared to be almost exact to the originals. To clarify. The front of the car started to be and stayed abnormally Hi over a year ago. I did some research at that time on this site. I first took apart the original sensors and cleaned them/checked...

So I am waiting on the Techstream cord to arrive from Amazon and I have installed the software. I decided to take a look at the car again today. Like I stated the front is riding super high and stiff. I could not adjust the ride height (It would just blink twice and stay in neutral). I decided...

Thank You!

Thanks for your response. Can you provide your suggestion for where/how to obtain/purchase Techstream and the easiest way to utilize this for someone who has no experience with it? Perhaps a suggestion/weblink for products if you have this info readily available? I am somewhat computer savvy and...

New poster here. I have been reading this forum for over a year which has been how long I have been trying to get my Auto Height Control issues resolved. I have done a ton of reading on troubleshooting. In a nutshell I began having issues where the front of the vehicle appeared to be in "HI"...