Recent content by gwrobertson89

And then there are some which say fit all 100-series: https://jandjautowrecking.com/products/98-07-lexus-lx470-land-cruiser-right-passenger-fender-bare-golden-pearl-057?srsltid=AfmBOorDY6K8609z1UQAANtO9TZXcRRqPn1KQSEutr7G_7sS-Civ2LDC This is the best price I can find for one online, and I just...

I messed my front right side fender up offroading and need a new one. Seeing a lot online that say "up to 2005" but I have a 2007 LX. Trying to confirm why there are so few to find that specify 2007. Similarly, any difference in fenders between LX and LC? Thank you!

To support the added load of steel front & rear bumpers, I’ve been running the kings & Ironman spacers (plus torsion bar adjustments) for a few months now and pressures are all in spec.

Ok! King springs are in and because I had to pay for the labor I had them do the 15mm spacers as well. - For the rear: pressures were so low they opted to lift the rear AHC sensor to bring rear pressure up into spec. Pressure now at 5.4, height at 21” - For the front: pressures in the 7’s after...

Thanks, that’s good to know. Worst case scenario, what is the risk of the sensor pressures being too low?

Ok following up with one additional question as I’m a week away from swapping the King springs in! @suprarx7nut ‘s AHC guide sheet and YouTube video have been like the Bible to me. My front sensor pressure was reading at 8.4 and rear at 8.2. If King springs reduce pressure by ~3Mpa, won’t the...

Thanks @suprarx7nut ! Some background context and additional updates - somebody from King Springworks did get back to me confirming all I need to do is ensure the product code is KTRS-79 and they are compatible with the 2007 regardless of what the vendor is saying. The context: I've just added...

Thanks all! Some background context and additional updates - somebody from King Springworks got back to me confirming all I need to do is ensure the product code is KTRS-79 and they are compatible with the 2007 regardless of what the vendor is saying. The context: I've just added steel front &...

@bozncsurf @geo5 @GTV And actually King Springs seem to say the same on their website: LEXUS LX470 UZJ100R - 4WD 1998 - 2006 - Fit your Vehicle - King Springs Automotive Aftermarket Springs - https://kingsprings.com.au/catalogue/vehicle/526/lexus-lx470-uzj100r-4wd-1998-2006

Any idea why King says 2006 was last year for compatibility?

They are pretty tough to locate nowadays! I've been looking at these ones which say in the Description: "LEXUS LX470 UZJ100R - 4WD 1998 - 2006" And confusingly it differs from their "Compatibility" section, where 2007 and even 2008 is included. To try to get to the bottom of this discrepancy...

Anyone know why King springs say they only go up to 2006? Is that perhaps an Australian convention by going off of vehicle production date instead of model year or something? I have a 2007 and just added steel bumpers, so want to ensure the AHC is adjusted / optimized accordingly. Ty!

Does anyone know where I can find a replacement bushing for the in/out telescoping bolt?