Recent content by Guy ManDude

  1. G

    Mustard 40's

  2. G

    Oil Pressure Dropped, then the noise started

    Thanks for the replies. Just loaded it on the tow truck. Let you know what they find.
  3. G

    Oil Pressure Dropped, then the noise started

    Yes, it increased if I touched the throttle and it sounded like someone was inside the oil pan knocking it with a hammer. Will this be easy for a mechanic to troubleshoot? The guy I use is a great 40 mechanic so i'm assuming he's seen it before but before I get it to him, I would like to know...
  4. G

    Oil Pressure Dropped, then the noise started

    I think I need some help. While driving down the road the other night, the oil pressure dropped to almost zero, and smoke started coming out of the tube that connects the top of the engine to the air filter housing. I stopped and the pressure came back up. The dipstick read full. Had no...
  5. G

    Gear reduction starter wiring

    Excellent. That way is super simple. I made it too complicated. Time to remove some wires in the 40 (that I installed yesterday)........ Thanks again for the help.
  6. G

    Gear reduction starter wiring

    I saw there were two ways to wire it, one was just to leave that last wire unterminated and the other was to add the relay to allow for a full 12v to the starter when the key is turned. That was in the FAQ section and it had a write up but for some reason my wires must be different. The little...
  7. G

    Gear reduction starter wiring

    I read the faq section about wiring a relay in when changing to a gear reduction starter and tried that yesterday. When the truck started the engine would no longer turn off. I could even remove the key and it stayed on. I thought I wired it exactly like the FAQ suggested, but obviously...
  8. G

    Son needs real time help

    Guess what is heavy and hard to push but will start if you do it? My 40!!!!!!! Thanks to all for the excellent help. I appreciate it. Does this mean I need a new starter? And if so can a dumb enginner change it?
  9. G

    Son needs real time help

    Starting to push now.
  10. G

    Son needs real time help

    Ones in the cab are fine. Where is the fusible link one? And to everyone that has helped, thank you.
  11. G

    Son needs real time help

    If all that works should I just go ahead and push it to bump it?
  12. G

    Son needs real time help

    Standing at truck now. Fan in cab and radio work. Battery is tight. Starter is tight. Ground is tight. What should I look for next?
  13. G

    Son needs real time help

    Another good thing I'll check. Thank you. Heading out now to go to the 40.
  14. G

    Son needs real time help

    1976. completely stock engine. I'll pass on your suggestions for the other things to check. He's been quiet for a bit now. I hope that means he's looking for something out of place. I hope it does not mean they've invented some dumb game of push the truck around the parking lot laughing...
  15. G

    Son needs real time help

    Can't hurt to try that. I'll pass it on. the thought of them pushing it to bump start it makes me kind of nostalgic......
Back
Top Bottom