Recent content by Diesel42

$50.00

Air cleaner crossover tube w/clamps from OEM air filter housing to throttle body

3B diesel exhaust manifold $125.00 Will ship from N.California Guessing shipping would be somewhere between $20-30, approx

Victron makes quality products

So far I. leaning on the pto being a Dana/Spicer. The adapter is a 30 degree but not a Chelsea. Still trying to identify these pieces. I need the adapter, but almost impossible to find if I don't know what to call it

Yes, with no avail. I found that one a few days back. It is different.

Can anyone identify this PTO(Yellow) and/or the adapter/spacer(aluminum) that bolts it to the GM SM420 tranny? I have the same PTO unit but need to figure out the maker and model #. I am looking for the adapter spacer which allows the angle for the front pto driveline to clear any front...

Hey, that's a great solution. Been doing this for decades and you just taught me another new trick!!!!!! Keep me posted on the progress and give me a shout once it's running and we'll dail up the tune. Excellent work

These issues always suck. Easy out generally never work. I know it;s alot of work, but, if you remove the head, you can get it on the work bench where you can accuratily deal with it. There're a few tricks. if you have a tig welder you can build uo the broken stud proud of the head and with all...

Awesome

What a great option.

Sounds like you're on the right track. What we;ve found over the years is the turbo kit won't cause over heating "IF" your cooling system is healhty to begin with. If it isn't, or you've got a weak engine, the turbocharger just exasperates it more. 1200+deg EGT's are on the cusp of high for long...

We have stock of the oem "DIESEL" badges at the time

Awhh, thank you as I stand corrected. BJ's were only imported(In N. America) into Canada. The U.S. only received FJ's. So, the 83-84 FJ40 would have also had them.

Only the 83 and 84 Canadian North American BJ42's came with the H55 5-speed. They recieved the forward top plate to allow for the correct floor alighnment. This places the shifter approx. 4" forward. The standard top plate for the H55 installed on BJ60's places approx. 4" to the rear. That...