Recent content by CivicFerio

According to the EPC the longer length springs H=485 to H=545 are usually found on GCC VX models with AHC suspension, 3rd row seats, dual spare and auxiliary tank.

I'm almost certain that those orange lenses for quads are painted over. The only country that I'm aware of that requires an orange markers on the front corners of the vehicle is USA. And since the quad headlights were never introduced in the USA market therefore the orange corner lens should not...

Hello, Thank you for the referral! I have 2 pairs on hand at the moment.

I been very pleased with my Toyo open country AT3 for 3 years and 20k. They are a more conservative type of AT so they have pretty good road manners. That’s why are now factory fitted on the TNGA-F suv.

I had the honor to talk to Doug at ARB about this. He told me they made a change on those shocks to address a concern some customers may have had with the valving based on how they had their vehicle set up, he didn't elaborate further. I have the older PN installed on my 80 and I suspect that...

Did you use oem ks? I had the same issue and it turned out previous owners installed aftermarket sensors. With oem sensors the issue went away.

Hello I have that tool new $95 shipped.

Not sure if you guys have notices there was a PN change for the BP51 front shocks for the 80 Series last year. Standard length went from BP51 60012 to 60043 Extended length went from BP51 60014 to 60044 I wonder what was changed as ARB Tech Support has no clue as well.

I work 5 minutes away from F&F though I have no direct experience with them, I have picked up my friend who left there trucks there for repair and they were all very satisfied.

I’m in the same dilemma but instead of chasing the ideal caster angle I want to correct the front diff flange angle and make it parallel to the t case flange like this https://www.therangerstation.com/tech_library/images/pinion_angle_bad_angles.PNG if Toyota follows this same rule, when we get...

Probably a gray area as aftermarket company sells replacement fenders, bumper and badges all the time.

I'm very interested in the new rack too but spendy! Looks like they have updated the product list for the 80 https://arbusa.com/site/wp-content/uploads/toyotaLandCruiser80Lexus450.pdf Pricing and application can be found on this page...

I have the same issue with my 80 with the bilstein shocks when heavily loaded. The bilstein just doesn’t have the low speed damping force to control the sprung mass. I switched brand new oem Toyota shocks and It went away. I also have 861 862 springs

While researching replacement oem AHC springs for a friend of mine with a UAE spec 100 series with 1HD-FTE with a rear sub tank (I'm so jealous!) I came across this interesting observation. LHD 100 as a 15mm taller springs on the LH while RHD 100 has same springs on both sides. 48231-6A710...

Here is my pride and joy. Owned it for over 13 years