Recent content by Chris Green90

I can ship you one out to the US or central America if that helps. Not sure what the costs would be though. Looking at about £150gbp for a reconditioned rack plus shipping.

You are going to need about a 15 mm spacer up front. Because of the suspension geometry a top spacer has the effect of doubling the lift.

37's

http://www.landcruiserclub.net/forums/showthread.php/34998-90-series-mods-and-repairs-FAQ

May have forgot to mention that the tyres are 37's

Sorry for not updating this one sooner guys but I have just been soooo busy. I have loads and loads of pictures and will do a full write up at some point in the near future but hope you will all be happy with a few pics of the (pretty much) finished product. Just need to finish off my bumpers...

At Last. Back to a rolling truck. All the bracketry is done and just needs the welding finished up but though you all might like to see some pics of what a 90 looks like with a solid front axle. And a couple of quick shots of the Spring and damper mounts. On with the steering...

Well Guys Pics as promised. First one all the IFS off apart from the Lower wish bones. Quick tip here if you are going to cut through the camber adjust bolts be careful not to have anything infront of them. They will pop and fire out at quite a rate of knots. Well thats all of the IFS...

Big day today guys. Very nerve racking to say the least. Stripped out all the IFS and the steering rack. Not too much of a big deal but then come out the grinder and the plasma. Guess there is no going back now. Took plenty of pics but left the camera at the unit so will pop them up tomorrow...

And then decided I didn't like the Red Door So Put the green one back on instead. Tread Plate instead Glass will stop that window deciding it doesn't want to be one again. (Side Windows Next) Did Some More Laning Then whilst Checking things over for a Coast to Coast trip I noticed my...

Hi Luis. Thanks for the interest. Drive shaft angle is fine. I had a similar question on another forum regards the panard. Please bear in mind that the pics have been taken with the truck 5 foot up in the air on the lift so the back axle is sat at full droop. The 90 is mine and is a manual...

So I decided that I wanted more from my shorty "Dirty Gal" than she was willing to give so now I am on with a Solid Axle conversion. I am using 80 series axles and had hoped to use the 80 transfer box to bring the drive to the front axle down the correct side. Well 80 series transfer case was a...

Hi all. long time 90 owner here. had my "Dirty Gal" for about 5 years now she has gone through some changes over that time. Just found this fourm and looking forward to sharing some pics with you all. At the moment she stands on iron Man 2 inch lif and a 40 mm body lift. custom sliders and winch...