Recent content by CHibbard

All, I know this question has been asked over and over, however, I see no real good responses. So....I will ask again, hoping that someone knows of a supplier or a valid paint code for the bumper end caps for a 1994 LC80. Even a close match is acceptable - as in supplier name and color...

Thanks for the tip. FF10 is not the bumper color, it was referring to the interior color. I will look at the SEM product and see what is color is closest. Thank you.

Hi All, I'm looking for a supplier for the Toyota bumper color FF10 (Dark Charcoal). I need to repaint my bumpers and FF10 is the verified correct trim color of my December 1994 build 80. Does anyone have a source? Thank you, Craig

Dust shield was backwards and the caliper was beginning to loosen. Reinstalled correctly and proper torque applied to the caliper bolts. 275 miles since Thursday and all ok. Thanks to everyone for their tips an suggestions.

Great info! I have numerous bulbs out!

Thank you for the ideas. I will dig into the situation Thursday. Update after I find the issue.

December 1994 build.

300K, USA Bough new, I'm the original owner. LC80 stopped in drive, no noise. Only when driving or wheel rolling and turning left. Did not try low range. The only change I made with the re-freash was new birfs from LC Parts.net. CDan provided all other parts. Everything was fully...

Could I have put the dust shield on backwards? The shield seems to adding to the sound. It looks right..... Today the 80 was not driveable at all. Heavy grinding when turning left was so loud. I guess I will take it all apart on Thursday and look at everything closely. I'm wondering if...

All, I have looked and looked and see similar questions. However, this is the second time I have rebuilt the front new birfs /bearings/seal etc.... Never an issue in the past. My 80 is all stock, nothing built up, stock tires etc.... This time around all went well during the...

Anyone have a great to excellent condition steering wheel from 1994/95 FJ80 with no airbag? Black in color. Please let me know. :) Thank you, Craig

You don't mention if the CEL is on? I've had the same condition for many months. Last weekend I did a complete cleaning of the TB, EGR and Intake. The EGR port into the Intake was carbon plugged solid. 2 hours of heavy cleaning with brushes. TB was dirty as well. Cleaned all ports...

Remove the 32mm nut attached the EGR and the EGR tube. Move the 32mm nut slightly down the tube. Remove 2 12mm nuts Remove both 7mm studs The EGR will come straight off Catch the metal gasket When you reinstall the EGR, add a small dab of anti-seize to the threads. Keeps the 32mm nut from...

Me too. Purchased new in January 1995, daily driver with 300K now and drives great. Just doing the intake cleaning along with the vac hoses as well as all injectors being cleaning by RC Engineering. :bounce::cheers::clap:

During my recent intake cleaning, injector cleaning etc.... the #6 injector connector was trashed. Broke into a bunch of little pieces while I attempted to disconnect. This is a simple fix. Push the wires w/metal connectors through the two holes, slip in the little white plastic locking...