bottombracket's latest activity

Pump timing set. Timing belt, tensioner and idler pulley installed. Injectors installed Cheers

Beautiful 3D printed (stainless steel) exhaust dump from Clark Fab. #001! 😋🤌 Cheers

I absolutely love this thread — it’s a perfect challenge for my project! Hope it’s okay if I chime in with a small addition. Strangely enough, the roll bar was never offered for soft top models, so there are no factory nuts on the B-pillar for...

Messaging you about vacuum pump

Look at @fl4031003 and his amazing 60 on 80 build for insight along the way. Though he used the entire 80 drivetrain and dash.

Tonight I finished bolting up the exhaust manifold/turbo, turbo oil lines, and got the 3 inch exhaust laid out. Relevant part numbers for turbo oil union, gaskets, and exhaust cushion attached. Nate would like to go to bed. PDI intercooler...

Yes, that is what it is for.

Couple more pics

Selling my Soft top and complete Bow set and a set of dark grey back doors that were cut into 1/2 doors . It’s a quality Thick 3 layer top. Lived in the garage while it was on. Windows clear and it’s in great condition. My 73 will live out in the...

Insane deal. The most unicorn-est of 40 series parts. This would be on its way to Texas if I didn’t already have one.

Now, the broken mirror: There are new OEM 80 series mirrors still available… But only in black and chrome. Yes I ordered a wobbly mirror fix from Delta VS, but I tried out the black and I think I might go for it.

The keychain is patina-ing nicely.

Tiny steps tonight. I installed a remote lock/unlock unit made by Trail Teq in Australia. As this is a euro spec HDJ80 with no RS 000, there was nothing to disable. Literally just pull apart the door panel, plug and play. This is really well...

Pedal assembly is showing the same part number: 78010-60010 throughout the entire run of the HDJ100/101 for auto and manual iterations. Only difference in part number is whether it's a RHD pedal or a LHD pedal.

@LCMoneyPit I do not have the correct pedal.

I want that.

I’m in for two sets of 12V and two sets of 24V. Please. This is amazing.

PCBs arrived today. Waiting on some parts. The total board size is about the same area as a single one of the relays that's flopping around loose in my passenger door. This is not the final design that I will provide to other folks - I am going...

Wow love the excitement here! Few updates for folks on next steps / timing: when can I buy? / ETA - expect about a month. This is just a design right now, I will order the boards and parts tonight. Then I'll need to assemble and test them. I'll...

Long term update on this thread: The SOLDER method is still holding strong on the front door. Additionally, the 12V lock actuator motor is still holding up even in a 24V system. I will consider that a permanent solution. The LOCTITE method...

Let me see what I’ve got

Amazing that this container is now at my place. 79 Double Cab work finally started today!!

If you’re looking to put a manual transmission in your 3FE powered FJ80 these are the bulk of the parts you’ll need. These used parts have 8k miles on them. (Can supply brand new H152 transmissions if you need that too…) Here’s what I’m selling...