ajax1's latest activity

91 92 come with semi float rear, some 93s have them then in 93 changed to full float, different brakes You would need to install a full float axle to get the disc brakes in back.

I have done 2 in car head gasket jobs, and they kind of sucked. I agree with the others here, just pull it when the time comes. That said, I wouldn't rush it as long as your HG is intact now. Just be certain every heater and radiator hose is...

I detailed the old girl up and took her out to a local lodge for a couple beers on the deck. I dare say, she was the purdiest rig in the parking lot. :)

Ignition fuse for me. Crazy. Up early for work and didn’t even think to check when it died. That same fuse went through the laundry a few days earlier hahaha

I got code 420, reset the code, bout 6 months later wife complained of f lack of power and truck being loud, bout 8 months later cat clogged blew the y pipe, no power on the hwy. Replaced with used y pipe with 175k and two used cats. Replaced...

My old Magnaflow system to my new one. Fit was excellent. Still nice and quiet. Changed out due to a cracked weld on muffler, rusted out bracket on muffler, and what was thought as a clogged cat. 89K miles in 6 years.

I have very recently replaced my exhaust system, except for the resonator pipe. I bought Magnaflow (and BRExhaust made by Magnaflow) from Summit Racing and I bought all hardware, gaskets, and cushions from Toyota. The Magnaflow exhaust is all...

I wouldn’t worry about the sender, if you want add some thread tape to the threads and see if that stops the leak

I’d make sure water pump is not leaking, it gets a gasket not sealant

Triple locked is just as dumb.

Drove her back to the Front Range to pull it apart to give her some love. Replace the injectors, and get it ready for the Alaska trip happening with @ExpoMax . Traded my dad and got to drive his 40 back up :). It was the maiden voyage after...

Please don't use that phrase ever again.

I disagree with them that factory lockers are worth more. Aftermarket lockers are much more reliable at this point.

37th Annual TLCA Rubithon

If the ignitor plug comes off or it can go out, will kill the truck, mine popped off on i70 put the plug back on the infinite and off I went.

Pm d ya @William839

Just did pump thermostat and radiator Pull lower skid Start draining radiator Remove battery and tray Remove grill Remove head lights Once rad is drained remove hoses upper and lower and bypass Undo bottom bolts one on each side leave the mount...

Knocked out the coolant system this morning. New yota rad New yota thermostat and gasket Asisn pump from rock autos New fan blades Asian from rock autos I rebuilt a black hub years ago with 13k weight, still running strong so left it alone...

Yes, OEM everything - rotors, calipers, pads, lines etc. Even fluid

Ran up mineral creek to Animas Forks.

I would plan 15k at least if paying someone

Well, I just got back last night from spending two days at Ozark Overland Outfitters in West Plains MO. Jason and his crew made the whole experience painless. Knowing it’s my daily driver with long trips in the future Jason: * replaced weather...

This guy always works for my pesky bolts

Both my 95 and 96 are on the head, you can drill it off pretty easy, don’t remeber if my 94 has it or not as that truck is not at my house. Usually if the truck has been sprayed again on the inside you won’t have the door vins anymore,

Should have a vin on the body at the driver. Should match the vin on the engine head which is on the pass front area of the head , gets pop riveted on. Vin on frame is pass side wheel well in front. Should have vin stickers on all the doors as well