Recent content by 99lx47O

awesome thank you.

where at?

sorry about that. its stock / no lift. so if its moog from japan its good and moog from mexico or where ever is bad or its hit and miss from japan?

looking to replace mine as the upper ball joint is going. seems easyer to swap the upper arm than press out and in a new joint. but what brand to get? MOOG ? SUSPENSIA ? DELPHI ? MEVOTECH ? ACDELCO ? As always thank you for your time and help.

Not sure if this is the right place for this but. Im prett good with a wrench so i know i can pull it out, but no press and dies to do the seals and bearings. Anyone know a place that would do a walk in tcase?

So I pulled the door panel. Turns out the person that was in there last didn't know what they were doing. The Part that the key goes in has a keyed bar that goes into the lock mechanism so when the key is turned it lock and unlocks the door. well they didn't put it in the slot. works now

Got a set in central fl

How much fluid does the AHC reservoir hold? Was going to suck out the old and put in new.

I had the key fob with me. I will try locking it from the outside with the metal key and have the fob with me and let you guys know.

I used an air wedge and a metal rod (I had put heat shrink on the rod to not mess up the paint) I used the rod to push the window down switch from the out side. With the car not running and doors locked the metal key opens the doors. There has to be some kind of circuit in the door that wont...

not with the car running and doors locked.

Yes the metal key. It works when the car is off and locked.

Just spent 20+mins jimmying open my LX. So my old 100 you could roll down the window and from outside hit the lock button then auto up the window and use another key to open to door. Great for running in with the dog in the car so they still have AC. Well let me tell you guys you CAN NOT!! do...

thank you for the info guys i think im going to go with the 285 55 20's

didnt know there was a themo bypass. thats pretty cool thank guys.