Recent content by 96LX450-Nick

Power Window Problem Update Update: Finally took it to a buddy with a garage.. He spent most of the day on it (took entire door apart) and finally found that in the rubber boot that connects the door to the rest of the car there was 3 broken wires:doh:. Fixed those and they work like a charm...

Checked on this today. None of the door switches work on any of the doors. Pulled the fuses just to be sure. All are fine. Any other Ideas? I thought maybe the window lock could be "stuck" in the on position but the driver door is always bypassed anyway so that should work.

I will check each door tonight and see if any of them work... Thanks

So yesterday I ran into an Issue. Never had this problem before. None of my power windows in my 2000 LX-470 work. Driver side panel does nothing... I thought it might be the fuses but when I looked into the manual there are other items on the same fueses and they all seem to work fine (moonroof...

Update: I got the new 02 sensor in but it did not fully fix the problem. Just so happens my neighbor has the OBDII computer scanner so I hooked it up. Misfire cyl 1,3,5,6 ....!!!! Put new plugs in and wires. Now it runs like new!! I checked the gap on the old plugs just for fun.. they were...

Reminds me of Pictures from Greenland < Greenland < Expeditions < Arctic Trucks As breathed says.. expiditions in Iceland / Greenland etc... How do you get your luggage off the roof??

Old thread but Im hoping some of you have corrected yours and can comment on this. Im having the same issue. My research has led me to believe its my front O2 sensor. It is no longer working therefore not adjusting my fuel mixture properly and creating a "flooding" effect. This is supported by...

Boyo, Sounds like our issues are more alike. The studder at part throttle is what I get and feathering the throttle is all that will get me by. Some days are better then others. Running a injector cleaner seems to help. I can only assume its the more complete combustion. I will try putting a...

Thanks, It seems its hard to get the guys at autozone to understand the burnt out bulb issue... Mike, What issues did you have that led you to change the O2's other then the CEL? Anything you noticed when driving... etc?

landcruising, Thanks. Does that mean they will not function if they are swapped? I am just looking for a quick check... Thanks, Nick

sparkplug, With the keys in and on on( i think it is.. or acc cant remember) the check engine light does NOT come on.

I am trying to debug what I believe to be a combo of a bad O2 sensor and a plugged up cat. 96' LX-450. 151k Stock... Are the 2 O2 sensors (One before and one after the 2 cats) interchangable? I believe my first one to be bad. The truck runs "rich" (strong exaust smell... poor gas milage) but...

New Update (Long Term) - So I noticed that it was spotty on the "shimmey" issue. I thought its probibly not U-joints becase if they were bad I would expect it to be more consistant. The wife had the car one day and took it for an oil change... (I know I should have done it myself) they sold...

80t0ylc, I have not torn into mine either. But my guess from what I know of interior HVAC lighting is yes one bulb for the entire HVAC. And there will be whats called a light pipe that directs the light to the correct location depending on which button is depressed though I would imagine its...

Sorry for the confuson Beowulf Thanks again for the idea. I will look into it... Nick