TwelveGravity

Did the 5 layer seal skin on my 80 and has held up great for 2 years so far outside here in Colorado. Comes with an under strap system that keeps the cover secure in the high wind. Sad the 80 is outside and not being fixed but happy it’s covered...

I considered that one but the engine is shot so I passed. It's on Facebook Marketplace too.

Not mine, just came across the add while surfing CL. Looks solid. https://chico.craigslist.org/cto/d/chico-1978-toyota-fj40-landcruiser/7873654816.html

Does anyone have any recommendations for a good quality outdoor car cover that would fit a 3rd gen with an after market front bumper? Weather Tech makes a really nice Cover but it is form fitting and wont fit with an aftermarket front bumper...

I parked my '97 5VZ-FE (3.4l V6) one Sunday and come Tuesday it wouldn't start. It wouldn't crank over but it didn't sound like a low or dead battery. I checked voltage and it was fine. I then pulled and checked the starter, it was fine. Then I...

Just finished my first later model steering wheel for @cruiserkreutz.

Heading to Stockton from Bakersfield and back on the 24th with an empty truck bed.

Thank you @vipergrhd the company that made the front bumper Shrockworks. Unfortunately they closed shop a while back. They made solid products. ARB makes a very similar front bumper and ARB is a reputable company.

Glad to see there are options out there, that's a great looking 3rd Gen you got @TwelveGravity who makes that front bumper? My daughter's 99 is not as good looking but she loves it just as much she sent it back home since she is in Korea for a...

Thanks @TwelveGravity. I ended up ordering new leather covers from Hot Rod Upholstery and will post some photos when they arrive of the before and after.

Here's my DD with OME springs in the rear, Eibach coilovers with Bilsteins up front. A Prinsu rack and Shrockworks front bumper.

Welcome to MUD. Clean 4Runner too. I have a '97 Limited and was looking into having the seats reupholstered a while back as well. I had a local shop quote me about $1,400 for just the front two seats. I came across these covers but have not...

Appreciate the reply and thank you in advance for looking up the info! Looked for quite a while to find this one in Cali, one owner vehicle with 225k miles. Not a perfect specimen but I wouldn't give a perfect one to a 16 year old! Amazing...

Plan is to make sure it's a solid runner so the wifey feels comfortable driving it frequently. I'll likely employ some of @wngrog patina tips and tricks. On my near term radar is upgrading the suspension and some carburetor work, it runs good so...

Took the white one up the hill with a full cooler late Saturday afternoon. I widened some trails for the red if it ever dries up around here . I was surprised how greasy the trails were. Engaged the front arb and the 4 barrel quite a bit...

I have not, thank you for sharing. I'll look into it. I do see that the boot to the pump plunger has deteriorated. I don't know if that would cause any issues.

Have you pulled the air horn off and looked at the accelerator pump plunger? Mine did something similar when the rubber replacement plunger I installed wasn't sitting correctly in the bore (part of the rubber folded over itself). It would idle...

I spotted this one earlier today while I was out.

AWESOME! Thanks for this.

You are not going to believe this. Still available from Toyota. Kinda expensive, but available. 55905-89110. $0.16 list. Yes I said that right. Sixteen cents. That's gotta be a misprint. At that price I would replace all of them. Shoot, I might...

I'm still having issues with the carburetor. Initially I was having problems with it in 3rd & 4th gear after about a quarter throttle. After finally making some time to work with it and ordering a new fuel pump, now it will idle fine but once you...

I replaced my fuel pump today.

Does anyone know how to get factory OEM AC button? Im missing 1 of the 4. I found some knockoff online but they looked nothing like the originals.