I have been able to some wrenching on the old girl that has been sitting in the garage the last 3 plus years. Six solid days working to get her back together. This weekend I spent the last two days "learning" to weld. Gained more respect for...
Got the head on, oil cooler and tensioner. Gotta clean up the oil pans still, rear and front main seal. Hopefully button it up tomorrow and do some honey dues for the wife.
Another one going together, this one will have a little higher compression should be about 10:1 doing a little experimenting because it’s going on my rig. See if we can get a little more power out of it. Bored with 1.0mm over pistons.
A while back I had wired up a 12v plug to the rear of the 80 so I could plug the fridge in. After a while of driving around with the fridge plugged in, the cigarette style plug would come loose and the fridge would lose power. I cut the cig...
I made some no lose brake bleeder caps
I have been losing these all my life.
Similar to the valve cap design.
Then installed the @Delta VS front hydro bumps. For a little 1/8" maybe lift and cush whoop action.
Now I have King Kong bump...