87CRUSR

I don't recall the cowl being a problem as described...

Jason, I just installed your Apron Seals and am very happy with the results! Initially I was reluctant to spend the money, but can honestly say your apron seals are much thicker and stronger than the ratty OEM ones I took off. And the supplied...

It is aluminum panel week for sure. Thank you for all the orders guys! Tailgate lids and Qtr panels.

Rear set upper and lower seat trims available? 3 pieces lower and 3 pieces upper

The trim pieces for rear seat bottom and back as pictured. If you only have the upper back trim or bottom, I would be interested in it. Thank you.

Is the second row seat back trim edge available? (The 3 piece metal trim that screws into the back seat rear and holds the carpet in place). Shipped to 91773 So California Thanks

Amp

Alpine Halo9 iLX-F309 with anAlpine amp parked under drivers seat. Front door speakers and 6x9s in the cargo panels.

Your observation is on track. I would suspect opening up presales for all products could create hours of time spent following up on "sold orders", explaining timedramea and processing refunds. Just saying....

Liking the 50% look.

Here’s mine with 50% ceramic tint, $500 out the door for side and rear windows. Held off on the windshield as I’m getting a paint job soon and might be replacing the windshield.

I found the source of the leak (now that I’m tearing out the rain gutter seam sealant). Grommet that fits around the AC lines going into the cabin - - I ran a bead of good quality silicone around it. No more leak.

Could also be the firewall seams underneath the fender and hood cowl. There is a thread with good pix on the leak repair. I have done the roof and A pillar seams, and windshield replacement . I believe the culprit is the firewall seams. With...

I dont know if you guys got the email or not, but let me tell ya. I am HYPED UP for these dashes. Check out the first run Email from @TRFarmers - Hello All- Update on the Safety Dash Pad project. I’ve received the first sample from the plant...

Nice looking rig. Love the set up. How does it ride with the 35” tires? What lift are you running? Here is my 82 with 33” x 10”5 BFG KM2s I have the 2.5”lift and was thinking about going bigger when the time comes.

I’ll play. 15x10 Micky or Procomp (not sure) alloy Not polished in this pic 35x12.5 Yokohama MT

Sweet mother of God. I just had to up and tuck.

Body is a waiting.......

I have literally never scratched a lottery ticket harder in my life. The perfect 60 series DOES exist, and its on this chassis

TRAIL TAILOR 60 SERIES CHASSIS 2” x 5” x .188” wall frame rails Laser cut and CNC bent bracketry for accuracy 1.75” x .313” wall front and rear adjustable 4 links with 80 series OEM bushings Fox Racing coilover shocks and steering stabilizer...

I am glad I purchased when I did.

285/75R16 BF Goodrich K2