Took a little drive up north to Banff for a relaxing week. I think I hit the point where the LX is finally broken in.
In the first three days we visited Kootenai, Banff, Jasper, Yoho and Glacier (the Canadian one and not Waterton) National Parks
I spent last weekend prepping the front end to accept some 37's over the winter. Followed the amazingly detailed post by @TeCKis300. Sourced an Eastwood roller from Marketplace. I had to grind two stud holes to fit the 5x150 pattern and used a...
Ditched the steel!
The front end look sooooo much better!
Next is to ditch those s***ty Hella and get something better. Ive been thinking about giving the HF 6 LEDs one a try. Reviews are pretty good!
Quick run up the mtn this morning to get my steps in. And it was 9/1 so of course the gauge had to tag along. Managed to jump about 9 birds but only managed to get one. They were in some super thick pines.
Winter salted roads will be here before anyone knows it. I also blasted the underneath with fluid film. I drove around locally to find some dust….ended up at a new home development construction site. Probably trespassing but I was quick and got...
Just finished up replacing my master cylinder and adding the Wilwood proportioning valve. Gravity bleed the master cylinder and vacuum bleed the brake lines. After bleeding the brakes I drove it around and the pedal was soft. So after adjusting...
Decided to chase some electrical gremlins, may have gotten a touch carried away but I've been meaning to replace cluster bulbs and clean the cover anyway
Got my 1994 running after replacing almost every coolant hose, radiator, fan, blue clutch, water pump, t stat, air injection delete, coolant flush (3x to remove green coolant) new power steering cooler, new trans cooler (both custom Setrab units)...
Added Front Diff armor a few weeks ago and worked out great on last trip. Now adding Rear diff armor today. Thanks Gemeral Green Manufacturing
@generalgreenmanufacturing
I installed the catch can without drilling any holes, and after a 20-mile drive, there’s zero oil collected in it. This leads me to believe the real cause of the excessive oil in the intake was likely due to failing spark plug tube seals and/or a...
I don't think I have the rich condition just the oil in intake issue. Do you think a rich condition could cause massive amounts of oil in the intake? I can't wrap my head around how they are connected. Sorry if I wasn't clear on my previous...
I have the stock 94 afm, and don't have the odb2 codes. Just the oil in the intake MASSIVE AMOUNTS. I should probably get your MAF sensor but still running stock on this one.
Was the oil consumption issue ever resolved? I have the same issue and thought it was going to be rebuild time but found lots of oil in the intake. So hoping it's something less time consuming. Ordering a catch can and new PCV, but 1qt every...
I've never used this site—thanks for the link! Do you know if the short blocks are the same between a '94 and a '97? I'm thinking about buying a running engine for our 1994 just to get it back on the road quickly. Then I could rebuild it at my...
Has anyone had experience with Yota1's complete gasket kit? It's supposed to be equivalent to Toyota 04111-66036. I think I'm going to have to rebuild my sons 94 and looking for ways to reduce cost without compromising quality. 1FZ-FE 4.5L...
We are on the Ferry from Skagway Alaska to Bellingham. We did not make it to Anchorage like we were orginally hoping to. My dad got tired of the long days of driving and wanted to slow down the pace. Alaska is a big state! From Colorado to...