LCDiesel60

Well-didn’t get any replies to help me…maybe someone with answers didn’t see this thread..maybe my honesty regarding my brain diminished due to grief kept people from responding—-so, I researched online for sometime and found consistent info...

Ordered from UK site; now a month wait-freight almost double the product cost—hope they last for decades Thanks again for the link and help!

…following up; did a lot more research; tell me please if this is or is not the solution? —4-pin momentary toggle switch; power and ground wires..then the 2-motor wires? Thankyou.

Putting older LX460 seats in the 60 and the seat switch up/down isn’t working. Tested the 2-wire contacts for motor with pos/neg power supply wires and motor works great both directions as I alternate the +\- contact. So, ordered on-off-on...

….the German site for Clim said they don’t ship to US..I’ll check the UK site next.

Thankyou for the additional information-the photos really helped to understand the product.

Great—thankyou!

Thankyou OSS and kirsmeis for the info-feedback and link… OSS-good to know you’ve had such good success on your hood; here in the western US we’ve lots of gravel roads in the mountains—hence oncoming traffic kicks up smaller gravel. Kirvesmeis...

I’ve searched for years and not found sources for exterior accessories—but; see them on your rigs in Australia. I’m looking for; —front hood bug deflector (bonnet?) —all 4 doors rain guard that fits into the top of the window channel. So window...

Freewheel—you were correct in your comment years ago; the 24v buzzer didn’t work; 2-local parts stores searching:no success for 12v buzzers. Amazon order arrived and I installed the 12v buzzer and success!! I want to thank whomever originally...

Hello Dmjay—that would be easier and faster in many ways; but the rig isn’t road legal yet and secondly we are way out—‘in the bush’ as they say in AUS. The 2-parts stores yesterday didn’t have the 12v buzzer since the 24v one didn’t work...

Wow-it’s 2025 and I’m finally getting to this mod: so many life challenges arose—LC parked or in the shop most of the past 14 years; nearing the end of a very long restoration/build—final accessories wiring; the mod didn’t work with my 24v...

I made a mess of the photos posting..not sure how—sorry; Here’s what the second photo-switch backside looks like.

Installing LX 460 98’ seats that appear to have electric heat in them—working on wiring low-off-high switches but the switches dont come with instructions Here’s the switch top view; Here’s the backside; 6-prong I found this diagram from...

Duncanrm; Thankyou so very much!! Now I can plan a move forward with more confidence—! Take care

I posted this yesterday on the 24v section for the HJ60-got an Aussie thumbs up which I appreciate—but, I’m hoping for an answer to my questions so I can move forward-working almost daily now to get this build done. Here’s the repost link...

HJ60 24v adding a 12v circuit block that also has relays (Bussman-see photos). I believe I bought it from someone on MUD building these out and selling-about 10 years ago…nearing the end of this restoration/build and don’t recall a few details...

86-HJ60-CAD style; nearing end of 10-year restoration (frame off) and doing wiring now for toys/accesories and modern 12v power sources. Was going to post some questions about 12v power supply or tapping off low side 12v battery—so much great...