joekatana

Pm sent , these are packed up and ready to be shipped out .

Because most of the JDM cruisers came with ac standard , in many lhd regions it was always a option. The underdash evap is lhd or rhd specific all the other parts would be the same. This kit is not compatible with oem components.

Around 80$

I’ll take a set. I’ll text you.

No it doesn't

Bump

Of course , pm sent

Alright well, my air compressor decided to eat its belt, which I inspected prior and it looked totally fine. Halted my progress immediately, so I tried to make this negative thing into some sort of positive bit. Organized a bunch of crap, cleaned...

Yes they fit every 7x troopy from 1984 to current

Most of the troopies have only one tank . Dual tanks where region specific as standard or optional . My hzj75 has dual tanks because it is ex NGO and therefore it’s also a 12 volt version instead of 24 volt .

Oh come on , name me one person that can resist a cruiser with a exhaust completely painted with undercoating ;-)

This has now been sold.

I can do that but the separate rear door panels are thinner then these and plasma cut instead of laser cut . Not sure if mixing and matching would be better then replacing the full set and sell your rears to someone else ?

They are ready https://forum.ih8mud.com/threads/troopy-rear-interior-panels.1366954/#post-16047334

They are ready https://forum.ih8mud.com/threads/troopy-rear-interior-panels.1366954/#post-16047334

Washed the bride's FZJ70 and was not in a rush so I attempted to clean under the hood. The FZJ70 is a 1997 model from Saudi Arabia that is in great shape, so I was not anticipating the results to be very pronounced ... just a getting rid of...

It’s mostly together ready for driving. Just need to finish the interior electrical. Need a wash. In front of the ARB car oppressor goes the CC servo from an 80 series.

snorkel in place.TIG and powder coated Cardinal BK208 .. total cost $350.

Defied the laws of physics yesterday...must have had a tailwind. I was not able to confirm with a cell-phone app. But I was passing people on the freeway, something that rarely happens.

Did that. Used OEM female pins and crimped them. Used crazy glue on the gap between the male pins and the plastic of the connector otherwise the epoxy creeps in before curing and locks the switch.

Cheers

I have 10 sets of rear Troopy interior panels made locally . I need 3 sets for myself but the other 7 are available . I had these made out of 0.125 Aluminum ( 3MM thick) and laser cut by a local fab shop here in TX . These are strong enough to...

I have 10 sets of rear Troopy interior panels made locally . I need 3 sets for myself but the other 7 are available . I had these made out of 0.125 Aluminum ( 3MM thick) and laser cut by a local fab shop here in TX . These are strong enough to...

Last bump before I start packing these up to go back with me to Europe !