caffecapri

Made it home safe on the high beams. Tomorrow I’ll check out the fuses and look into bulb replacements

That was going to be my suggestion. Deal with it at home and in the daylight. If your high beams suck as bad as some of them nobody will notice!

I'd check the connector on the bulb and also if the bulbs are just burned out.

I bought it this morning and took it to Toyota to have new tires installed and an alignment done. They also did their little inspection thing so someone did poke around under the hood. Could something have popped loose? I don’t know what to...

I’m a fan of the OE rims. The 16” ones on the early 100s in particular are functional and so cheap they’re practically disposable, but they don’t need to look that way. I scored some on FBM for next to nothing, but they were covered in...

3 x 5 index cards also work well. Package of 100 costs 72 cents at Walmart.

This is the best deal I found on a 200. It does seem the LX570s are going for less $ than the LCs. This one's at Stonecrest Toyota just east of Atlanta. If you do call or go see it, ask for Chelsea. She seemed like a great sales person. It's a...

I remember seeing a 100 series for sale on Japanese Classics that had those wheels. Not sure if they’re the same mfg but gives you an idea.

I was in a similar dilemma. I kept the 100 and bought a 2020 Sequoia. 5.7 engine and a ton more room than a 200 series. They are cheap compared to a 200 series.

If I could, I would put a 100 body on a 200 drivetrain. Not because it looks better but the outward visibility is better and the 100 has a certain feel... maybe the best of all the heavy duty Land Cruisers. The 100 actually feels more solid to...

Hi everyone I posted this on the 200 forum, just figured I should also ask the 100 series people. As the title says I'm thinking of selling my 100 series to get into a 200 either a lx or lc. I am having a tough time because there is a lot that I...

more

I also loved that the place I bought it from went through the whole truck. They replaced valve cover gasket, spark plugs, battery, shocks, steering rack, ton of bushings. Put new wheels and new 35” tires. It was really a steal IMO.

Cheaper for the same condition than you are going to find in USDM. I was also a teenager during the initial fast and furious saga so the idea of having an RHD vehicle has always been kind of a dream. Haha.

Genuine question, forgive me if it's a dumb one as I'm new to these trucks: why opt for a JDM 100-series if it's still equipped like a USDM truck? 2UZ, no AHC, and I assume no other special bells or whistles that the LC didn't get in the US. It's...

Hey y’all! New here! Just picked up a 1999 Land Cruiser. Super excited to be here! Planning little resto-mods and just enjoying it in the Appalachian Mountains!

Will be letting my baby go to a new home - 2018 Toyota Land Cruiser – Brandywine / Terra – 73k mi – $67,500 73,000 miles | Texas title in hand (located in Fort Worth, TX) | Fresh paint correction + ceramic coating Old Man Emu 2” lift ARB...

I'm the 4th owner, owned in southern states. The carfax has everything! This is from the previous owner when I purchased in April 2023: -Timing belt -Water pump -Serpentine Belt -Spark Plugs -Heater T’s -Coolant flush -Lube, Oil, Filter...

I'm local and interested. Could I come see it this weekend? Also could you post some pics of it when the running boards deleted as well as the second row and cargo area? Why hasn't this sold yet? Am I missing something?

I remember putting fires off Aircooled VWs many times, most were caused by ppl that added a cheap fuel filter before the carb and too close to the manifolds, but if a quality hose was used and a good filter was installed after the fuel tank, and...

Classifieds here, FB MP local to you, easy to find. Big thread on using Tundra wheels too.

Selling my brand new set of TE37XT in Bronze. The sizes are 18x9.5 0 offset. Bolt pattern 5x150 Located in Socal Rosemead,Ca Price 3300 picked up

Sorry, realize this a few months old. 703's fit. The center cap on the front doesn't though, maybe that's why they took it off. @BenCC is making some center caps though (Builds - Benjamin’s 3D Prints Build -...

After we lost control on gravel and hit a tree (low speed, no one hurt), I went on the hunt for another 100 within our budget, which was not easy. I bought the one we totaled (a 1998 LX470) 9 years ago with 121,000 miles for $10,500. That rig...

I’m looking for someone from MUD that is near the Ft Worth area that would be willing to take a look at a 100 Series for me? Maybe a video of it running and driving? I’m happy to compensate someone for their time. Thanks