suppjoe

Big weekend for the truck bed. Cut out all four corners as each had some severe pitting or was fully swiss-cheesed. It went OK. Drilling out spot welds from underneath was exhausting and the whole process was not nearly as easy as I'd anticipated...

Didn't take any photos but got some hammer and dolly work in on the passenger-side bedside. I'm shooting for zero body filler but will probably have to use a filler primer at a minimum. Weekend was shortened because my brother and I rode out to...

Fender

just now looking through this. were those jack stands on pg 1 made from a model a axle housing??

I live up in Atlanta but my family has a shop that I tinker out of closer to Macon. Kinda relegates me to weekends only though. I think the green would be cool, especially if I can come up with something to snaz it up over stock. Really fine...

Got the bed media blasted this weekend. A family friend has a sure enough blasting setup. It's like fighting a giant snake but made extremely quick work of the bed. Think I got it all done in an hour and a half. Then trailered it home and...

Some reflective butyl insulation in this weekend. Will be taking additional measures to make sure this is a comfortable riding truck. Also knocked out some more wiring which you wouldn't be able to tell from photos. Finished the start relay...

Thanks guys, that means a lot!