Looking to buy a later 1975 to 1979 fj40. Factory motor would be a plus. Or an older year with minimal body rot, Willing to trade my 94 fzj80 w/146k and goodies Or plus cash. Or just cash transaction.
Located in NC, but im good to travel 400miles ( my 80 will do that no issues as well)
Thanks
FJ40 | BJ40
Classifieds: Toyota 40-series Land Cruiser
Filter by prefix:
.
Filters
***SOLD***
My brother owned this truck for several years and did the SOA on it. My brother traded it to a friend of ours about a year ago but our friend didn't do anything with it (only drove it maybe 25 miles and kept it inside a garage) and he asked if I would like to buy it back. I told him I could either buy it back from him and flip it or I would help him sell it. He chose for me to pay him and flip it so here it is.
I am giving some history because I don't know a lot about the truck but my brother can help me with y'alls questions. I will try to answer as honestly and completely as possible but I have only had the truck about 2 days.
It is a 1974 FJ40. It still has the Toyota 6 cylinder and 4 speed tranny. It has an...
If any one has a solid land cruiser any year , let me know 5-8k range cash in hand just sold my tj
954-439-2576 txt me
Also have a 1995.5 taco mint 4x4 extended cab v6
W frame rust , I could trade with money in interested , rust is fixable
This truck runs great and I have driven it to Green Bay, Wi twice in the last year including in December this year. Even in their cold winter this truck fired right up. I daily drive this truck and it runs/drives very well. Its been built to drive anywhere in the nation at the drop of a hat and I wouldn't hesitate to take it to California tomorrow.
Within the last year the following work has been done:
Engine work: Top end rebuilt
Head gasket
Valve adjustment
all associated gaskets
Complete fuel system:
New fuel pump
New fuel lines/clamps
Electronic choked carb was gone through
Fuel tank was vatted
New fuel cap
Complete Ignition system:
Electronic Ignition kit
New coil
New...
This 1970 FJ40 CHevota is on EBAY. Located in Meadow Vista, CA. Wondering what you think a fair price would be. There are YOUTUBE videos at the bottom of the listing.
http://www.ebay.com/itm/Toyota-Land-Cruiser-Chevota-1972-FJ40-TOYOTA-LANDCRUISER-LAND-CRUISER-FJ40-CHEVY-350-/201049911615?forcerrptr=true&hash=item2ecf82313f&item=201049911615&pt=US_Cars_Trucks
I originally bought this truck when the odometer read 9400 miles, since then I had installed a secondary tank in the main cabin under the passenger seat, last november i took it to get a complete revamp of the engine and drivelines all receipts can be included and made available. The below description is what was done back in 2006. I have had the truck since 2010 and have only put 10,626 miles on the engine, and it runs like a champ. A very reliable truck always cranks up even with the recent ice storms, never ceases to amaze me. I hate to get rid of her, but we are expanding the family and will need to start down sizing some of my toys. Please see the details from the original restoration by Rocky Mountain Cruisers.
RMC Outback...
Looking for a cheap 40 for my shop. Call 720-316-0008, email info@callahanoffroad.com or pm me here.
http://atlanta.craigslist.org/atl/cto/4308135347.html
My son's 40 I've been helping him with over the years. Used to belong to my brother. Been in the family for a while. Currently in my barn, cranks up, 4x works, shifts etc.. as the ad says plenty more tlc needed. PM me with any questions.
More info here http://www.ttora.com/forum/showthread.php?t=115223&page=3
Thanks,
Ted
Hi,
I'm new to MUD, fairly new to Nevada and am looking for an FJ40 to use to access remote areas of desert mountain ranges.
Being new to Nevada, I didn't realize just how restrictive DMV is for what they will allow to be registered in (Clark County (Vegas) and Washoe County (Reno)), unless its registered as 'classic' and restricted to 5000 miles per year.
So, I'm looking for either:
1. An FJ40, newer than 1967, that has already successfully passed the Washoe County or Clark County, NV Smog test and been registered in NV - BUT, not as "classic".
2. An FJ40, older than 1968 - no smog test required, if the engine is also older than 1968. This can be located in-Nevada or out-of-Nevada, BUT, (for me) the body and chassis VINs...
- Locked
$31,500 obo
http://vancouver.en.craigslist.ca/van/cto/4372057783.html
Has anyone had to repair or replace this part? Just a complete rebuild done on my B engine and the mechanics believe this part has gone bad. Im in Indonesia, so of course they say it can be refubed. Part # 22100‑56082 B..BJ40, 43, W/EDIC (01/1982 - 09/1984)
Any help or guidance on costs etc would be appreciated!
Mando
:cheers:
Original 77 california fj40,complete rig, been sitting for years on a ranch, former hunting rig. Good dry california 40, but rear floor rusted due to water puddling, surprisingly the rear sil is great as are the quarters and rockers. Front floors are scaley but no rust through. Back of tunnel rusty. Looks like it has been on its right side, some damage to the top and door and the windows have plexi glass. Doors and rear ambi doors have a little scale at the bottoms but no rust through. If this was on the east coast it would probably be considered very clean! Working on getting started, coil is shot, but has good compression, clutch hydraulics good, brakes are spongy. This is sold with a bill of sale, out of ca dmv system, so it can be...
I have my FJ40 Crawler for sale. Please see links below.
The truck is located in Deale, MD near Washington DC
I am asking $6500.
There is body damage to the right front.
1978 2F 6cyl Engine
DUI/HEI Ignition, Weber 38DGAS
1978 H41 4-speed Transmission & Transfer Case 4.925:1 1st
Advance Adapters Rock Box 3.44:1
5 37" Goodyear MT/R Tires on Allied Rockathons
Toyota FJ60 Full Floating Rear
4.11 Gears ARB Air Locker
Chrome Molly Burfield Front Axles
4.11 Gears ARB Air Locker
Man-A-Fre OME Suspension w/U bolt Flip Kits, 3" Body Lift
2.5" Alcan Springs, Painless w/p Harness, Auto Meter Gauges
Warn 8274 12K winch, 140 amp Marine Alternator
New Factory Reproduction Right Front Fender w/Hardware
New Rear Finder Well Factory Reproduction Sheet...
I have a 1973 FJ40 factory soft top project. I had all the intentions of completing it and having fun with it. The body; all the rust has been cut out and replaced. Front fenders have been replaced with tube fenders. Previous owner did all the fabrication. Has original tailgate, not ambulance doors. It has a spring over axle life, brand new 36” Super Swamper tires and Pro Comp rims; it will make an excellent mudder. Motor, has the original 1F motor with all new clutch parts and resurfaced flywheel. I upgraded to a 4 speed transmission. The motor is currently out and I had a lot of work done to it, also new rear main seal. I did a test start and it runs great on the bench. Just needs the mounts put back in (I have them) and the motor...
Hello,
I am listing my beloved 40. My family and I have outgrown the old girl and recently bought an LX450.
I am sure that I will regret selling her but I have way to many vehicles and dont really have room for to keep the 40.
The 40 is a great daily driver. runs perfectly straight at 70 mph on the hiway and gets right at 12 mpg.
specs:
SBC stroked 380 with rebuilt heads all new gaskets, new timing chain, new cam- for better performance while (daily driving)
Sm420
new carb,
new fuel pump
new fuel lines braided hose and AN fittings
new fuel filters
new pain job
floor boards covered in color mached liners
metal tech nose guard
warn winch 900
new modified family cage from metal tech
front axle partial rebuild when I installed 60...
For sale is my 1973 FJ 40. I've owned her now six years and I not using her like I should, so she's up for sale. Here is a list of things that she has:
Power terrain:
Small block 350
Four speed trans whith three speed transfer case
Ram horn exhaust headers
Sag power steering
Long range tank in rear, think its a 40gal
Suspension:
2.5 spring lift
Four inch tri shackles
1976 fj40 front end with stock disk brakes
Five wagon wheels
KM 2 BFG 285/75/16. 85%
Stock rear
Body:
Some rust on corners
Floors in great shape
Tub in great shape
Interior:
Top in great shape
Stock seats
Newer rear bench seat
Front rear heaters work
All components working
Headliner in great condition
I no there's more so if intrested please call and ill give any...
Not mine!!!!!!! $1,500 Located just south of Fort Worth, TX.
http://dallas.craigslist.org/ftw/cto/4368714453.html
I am looking for a rear view for my 66 fst.
Give me an email if you have one please.
Dukes
wdukes63@gmail.com
(ma) locked 72 fj40 on 35's $4500
NEW PRICE i paid 3800 and put around 5k into it. It is now just taking up space in the garage, needs a new home. NO rust!
THE GOOD
-new paint (not professional but good)
-all new wiring
-new custom instrument cluster including fuel sender.
-chevy 350 with msr 5al ignition coil and msr distributor
-powertrax lockers installed front and rear with all the correct axle clearences.
-new centerforce 2 clutch
-new clutch master and slave cylinder with stainless braid hose
- 3 speed on the floor manual
- custom black leather seats
-95% left on 35" tires
-4" lift roughly
-power streering
-warn 8279 winch with like 100' of good cable, with functional spare 8279
-white knuckle off roading rock sliders
-front...
Not mine. Friend just told me about it.
http://delaware.craigslist.org/cto/4342903441.html
Wanted to buy and FJ40 or BJ40, below are some specs:
1. Restored White or Dune Beige
2. Good running/strong F2 Inline 6 or Diesel engine
3. 1978 or newer (prefered)
4. Hardtop
5. Large fuel cell (a must for a DD)
6. Will be used as a daily driver but also for hunting & trout fishing
7. AC would be nice (not a must)
I live in Georgia,and would like to find one in South, but I'm willing to travel to see the right 40. I'd like to keep the price around $30K (+/-) for a good looking/running rig.
Regards,
Rick
I am looking for a 40 series, mostly stock, with little to no rust. I can handle getting the engine and mechanicals straight just am not looking for a rust removal endeavor. I'm in NC if that helps. I am ok with shipping whatever you may have. Cash on hand for right rig...
Not mine, just trying to help this lady out.
http://sacramento.craigslist.org/cto/4352007439.html
4 Speed Stock and 5 Speed Twin Stick shift pattern instruction plates. These are printed with sublimation ink on .024 thick Aluminum plate. These look like the OEM shift plate. These do not have holes drilled so you can match the holes you already have or can put them on with adhesive. Not sure what adhesive you would use or how it would hold up. The Five Speed Twin Stick was made to look like the 4 spped as far as spacing style and font with the twin stick transfer added. Please PM me for payment instructions. The 4 speed are $24.00 ea and the 5 speed are $28.00 ea. Pricing includes priority mail shipping.
- Locked
