well after searching for about two months i finally bought an 80.
I was looking through some posts and swa Airlaid's post about his 80
https://forum.ih8mud.com/80-series-tech/354227-just-reaching-puberty-my-95-a.html
I got in touch with him and we put a deal together, I bought the truck sight unseen and could not be happier with the truck. Airlaid is a standup guy, it was nice to buy a car and have it be such a smooth experience. wow did he take care of this LC.. below is the list of mods he has done. Airlaird had also kept really nice service records for the truck. ive put 450 miles on it so far and its a great rig I love it .... thanks again Airlaird your the man
( I have receipts for the 90,000 miles checkup which included:
(Total Knuckle job…referred to as birfields). This is an item that is costly and needed. I had this done with all new seals etc.
(Installed a PHH (Pesky heater hose)
(New In-line fuel filter). There is absolutely nothing as far as maintenance needed on this truck….except an alignment
In Addition. I have done the “Blue Clutch Mod. For a much colder A/C
I have installed an Aux 12” in front of the Radiator for better cooling.
Aftermarket includes:
Old Man EMU lift kit
SLEE Drive Shafts
SLEE Control Arms
CUSTOM ARB Bumper
TRD Supercharger
Prewired for Dual Batteries (currently not in use)
BORLA Exhaust
SLEE Sliders
SLEE Belly Skid plate (which covers Tranny)
YUKON 4:88 gears
Superflift “truspeed” calibration module..for the correct speedometer readings
Uniden CB and Firestick antenna
NEW Leather with embroidered “Landcruiser”
Japanese Domestic Market (JDM) grab handle
JDM side mirror for front fender
JDM clear turn signals (The factory orange are included as spares)
JDM clear running lights
Cockpit lighting from a helicopter to light up CB radio at night
SLEE front Spacers
DBA (Australia front and rear slotted and drilled rotors)
Kenwood CD/cassette player and EG
Infinity speakers front and rear doors
LEXUS 450 wood trim on doors and center console
PIAA 4” lights in bumper
HELLAS on Bumper
Custom Skid plate
SLEE Rear bumper and Swing away carrier
TJM Jerry Can holder
Hella Backup Light
ASA Wheels/locks
Brand NEW Sealed Gell Battery
ARB Snorkel
SLEE Brake Lines
SLEE Headlight Wiring Harness
Sylvania high intensity bulbs
Fully functional- Painted to match hood scoop AND mudflaps.
Equus backlit gauges (tach and boost)
ARB steering stabilizer
ARB LTR shocks
what I have added so far.
ARB lockers (4wd outfitters)
new oak carpet and floormats (cdan)
scanguage II
Led dome, door and map lights... thanks george great product.
new shocks for hood and rear gate (cdan)
new starter (cdan)
HID offroad lights
raceline beadlocks and 35x12.5r17 km2 bfg
waiting on a steering wheel from (atlas)
I was looking through some posts and swa Airlaid's post about his 80
https://forum.ih8mud.com/80-series-tech/354227-just-reaching-puberty-my-95-a.html
I got in touch with him and we put a deal together, I bought the truck sight unseen and could not be happier with the truck. Airlaid is a standup guy, it was nice to buy a car and have it be such a smooth experience. wow did he take care of this LC.. below is the list of mods he has done. Airlaird had also kept really nice service records for the truck. ive put 450 miles on it so far and its a great rig I love it .... thanks again Airlaird your the man
( I have receipts for the 90,000 miles checkup which included:
(Total Knuckle job…referred to as birfields). This is an item that is costly and needed. I had this done with all new seals etc.
(Installed a PHH (Pesky heater hose)
(New In-line fuel filter). There is absolutely nothing as far as maintenance needed on this truck….except an alignment
In Addition. I have done the “Blue Clutch Mod. For a much colder A/C
I have installed an Aux 12” in front of the Radiator for better cooling.
Aftermarket includes:
Old Man EMU lift kit
SLEE Drive Shafts
SLEE Control Arms
CUSTOM ARB Bumper
TRD Supercharger
Prewired for Dual Batteries (currently not in use)
BORLA Exhaust
SLEE Sliders
SLEE Belly Skid plate (which covers Tranny)
YUKON 4:88 gears
Superflift “truspeed” calibration module..for the correct speedometer readings
Uniden CB and Firestick antenna
NEW Leather with embroidered “Landcruiser”
Japanese Domestic Market (JDM) grab handle
JDM side mirror for front fender
JDM clear turn signals (The factory orange are included as spares)
JDM clear running lights
Cockpit lighting from a helicopter to light up CB radio at night
SLEE front Spacers
DBA (Australia front and rear slotted and drilled rotors)
Kenwood CD/cassette player and EG
Infinity speakers front and rear doors
LEXUS 450 wood trim on doors and center console
PIAA 4” lights in bumper
HELLAS on Bumper
Custom Skid plate
SLEE Rear bumper and Swing away carrier
TJM Jerry Can holder
Hella Backup Light
ASA Wheels/locks
Brand NEW Sealed Gell Battery
ARB Snorkel
SLEE Brake Lines
SLEE Headlight Wiring Harness
Sylvania high intensity bulbs
Fully functional- Painted to match hood scoop AND mudflaps.
Equus backlit gauges (tach and boost)
ARB steering stabilizer
ARB LTR shocks
what I have added so far.
ARB lockers (4wd outfitters)
new oak carpet and floormats (cdan)
scanguage II
Led dome, door and map lights... thanks george great product.
new shocks for hood and rear gate (cdan)
new starter (cdan)
HID offroad lights
raceline beadlocks and 35x12.5r17 km2 bfg
waiting on a steering wheel from (atlas)
