Yeah, we stock that!
We still have a good number of customers running drive flanges on older Land Cruisers and the bulk majority of our 1990+ customers are utilizing drive flanges (as opposed to AISIN hubs). As mileages climb higher and higher the internal splines on the drive flange start to wear and you can get a "clunk" out of the drivetrain. Inspect and replace as need when doing a knuckle overhaul, wheel bearing service or CV axle job. These are also popular for our restoration customers. We stock all of the studs, cone washers, dust caps and seals and gaskets too. Give us a call!
Part# HUBFLG43421 Shown Above
Part# HUBFLG60013 Shown Above
Part# HUBFLG60022AFT Shown Above
Part# HUBFLG60040 Shown Above
AVAILABLE APPLICATIONS:
Drive Flange - $37.50
One required per side, 2 per axle
Fits Early-9/75 4x/5x w/Course Birf & drive flange NOT locking hub)
Part# HUBFLG43421
Drive Flange - $37.50
One required per side, 2 per axle
Fits 9/75-1/79 4x/5x w/Fine Birf & drive flange NOT locking hub)
Part# HUBFLG460012 (Joint Fuji Japanese)
Drive Flange - $42.50
One required per side, 2 per axle
Fits 1/79-1/90 4x/5x/6x/7x w/Fine Birf & drive flange NOT Aisin hub)
Part# HUBFLG60013 (Joint Fuji Japanese)
Drive Flange - $57.50
One required per side, 2 per axle
Fits 01/1990-04/1994 80 Series w/drive flange NOT Aisin hub)
Part# HUBFLG60020 (OEM Toyota)
Drive Flange - $24.50
One required per side, 2 per axle
Fits 01/1990-04/1994 80 Series w/drive flange NOT Aisin hub)
Part# HUBFLG60022AFT (Aftermarket)
Drive Flange - $59.50
One required per side, 2 per axle
Fits 04/1994-01/1998 80 Series w/drive flange NOT Aisin hub)
Part# HUBFLG60040 (OEM Toyota)
Drive Flange - $67.50
One required per side, 2 per axle
Fits 01/1998-2007 100 Series w/drive flange NOT Aisin hub)
Part# HUBFLG60060 (OEM Toyota)
We still have a good number of customers running drive flanges on older Land Cruisers and the bulk majority of our 1990+ customers are utilizing drive flanges (as opposed to AISIN hubs). As mileages climb higher and higher the internal splines on the drive flange start to wear and you can get a "clunk" out of the drivetrain. Inspect and replace as need when doing a knuckle overhaul, wheel bearing service or CV axle job. These are also popular for our restoration customers. We stock all of the studs, cone washers, dust caps and seals and gaskets too. Give us a call!
Part# HUBFLG43421 Shown Above
Part# HUBFLG60013 Shown Above
Part# HUBFLG60022AFT Shown Above
Part# HUBFLG60040 Shown Above
AVAILABLE APPLICATIONS:
Drive Flange - $37.50
One required per side, 2 per axle
Fits Early-9/75 4x/5x w/Course Birf & drive flange NOT locking hub)
Part# HUBFLG43421
Drive Flange - $37.50
One required per side, 2 per axle
Fits 9/75-1/79 4x/5x w/Fine Birf & drive flange NOT locking hub)
Part# HUBFLG460012 (Joint Fuji Japanese)
Drive Flange - $42.50
One required per side, 2 per axle
Fits 1/79-1/90 4x/5x/6x/7x w/Fine Birf & drive flange NOT Aisin hub)
Part# HUBFLG60013 (Joint Fuji Japanese)
Drive Flange - $57.50
One required per side, 2 per axle
Fits 01/1990-04/1994 80 Series w/drive flange NOT Aisin hub)
Part# HUBFLG60020 (OEM Toyota)
Drive Flange - $24.50
One required per side, 2 per axle
Fits 01/1990-04/1994 80 Series w/drive flange NOT Aisin hub)
Part# HUBFLG60022AFT (Aftermarket)
Drive Flange - $59.50
One required per side, 2 per axle
Fits 04/1994-01/1998 80 Series w/drive flange NOT Aisin hub)
Part# HUBFLG60040 (OEM Toyota)
Drive Flange - $67.50
One required per side, 2 per axle
Fits 01/1998-2007 100 Series w/drive flange NOT Aisin hub)
Part# HUBFLG60060 (OEM Toyota)