Wanted WTB: 13BT air cleaner, exhaust elbow

[fe sus]

Location

United States

Like the title says... I'm looking for a 13BT air cleaner... or at least the elbow that connects to the turbo intake... and the exhaust elbow that comes off the back of the hot side of the turbo. Any out there?

 

[Canuck]

Check with G&S Cruiserparts http://www.gscruiserparts.com/index.html

 

[2 Bees]

I have one elbow new for $50 plus ride. Missing vacuum nipple and few small gashes on inside mounting surface.

 

[fe sus]

as long as it's functional I'll take it... what's the function of the vacuum nipple? i assume this is the exhaust elbow?

 

[2 Bees]

it's the flex rubber elbow that connects to the turbo intake. Or do you need the cast iron piece on the intake side? If its the cast iron piece I also have that piece used for $150 plus the ride.

 

[fe sus]

actually need both... but I'd need to make sure the angle of the exhaust elbow would work for truck... should be able to tell with a photo if you have one...

 

[lowenbrau]

Bic Performance has some cool CT26 stuff. If you buy their turbo flange you can make a decent 3" dump from it. Alternately the Supra dump is nearly 2.5" and works in a 40. It drops the exhaust straight down from the turbo. Ratpuke has that on her BJ42

 

[fe sus]

thanks for the link... I have a nice piece of 3" i'd like to use if I can... so far the elbows i've tried haven't worked out... I looked at a buddy's 13bt yesterday and now realize I don't need the intake it uses... a simple angled piece of tubing should do just fine.