I can bring the press to work tomorrow, but, sounds like you don't need it.
Work weekend MLK (1 Viewer)
- Thread starter ClankBang
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
justbecause
perpetually lost.
I will need a press if I do the control arm to frame bushing. I dont know why ironman wouldn't take their good idea of no-press needed bushings and apply it to all their bushings.
via mobile app.
ClankBang
Internet Excogitator
- Thread starter
- #23
Zack..
Matt did bring the press with him today but suggested that if you can just drop off the control arms and the bushings for the rears and we will get them pressed in the next week or two.
For anyone who is interested I think I might get started around 3 tomorrow afternoon.
And work into the night as well as Sunday. Let me know if you are thinking of coming by and I will make sure there are enough refreshments.
Matt did bring the press with him today but suggested that if you can just drop off the control arms and the bushings for the rears and we will get them pressed in the next week or two.
For anyone who is interested I think I might get started around 3 tomorrow afternoon.
And work into the night as well as Sunday. Let me know if you are thinking of coming by and I will make sure there are enough refreshments.
I might swing by tomorrow night to be regaled with stories of the beer fridge and lend a hand with repairs if need be. Maybe if I'm feeling frisky I'll bring the brake pads with me to put on the 100.
PM me with your address or directions if you don't mind.
BamaHeel
Intergalactic Champion
I too may come by Saturday and/or Sunday. Keith, brake pads are super simple. Only thing you may want other than the pads is a couple sheets of garnet paper (not sand paper bc of the silica). Mountain Brook hardware by the Western in Mt Brook village has it for $2 or so a sheet
Focus. A little less party, a little more work. Looking forward to the pic of the newly exposed main seal
[YOUTUBE]d0vXxH1IEmQ[/YOUTUBE]
justbecause
perpetually lost.
about to head that way. party isnt over yet is it?
Remember, the objective is to swap the transmission
[YOUTUBE]X9Svm8xc1z8[/YOUTUBE]
Done yet?
BamaHeel
Intergalactic Champion
Matt aren't you supposed to be spending time with your family?
Clearance, how's your PI and/or butler you intend to defile later?
Clearance, how's your PI and/or butler you intend to defile later?
