Will FZJ75 radiator or other fit a HZJ75 ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

B

Blade

10 Year 15 Year
Joined
Jun 29, 2010
Threads
34
Messages
252
Location
Switzerland
On another thread I wrote that I am having big overheating problems here in Ecuador.
I just can't get rid of the idea, that my 2 year old australian copper radiator is crap... Here the only 7series I see are the FZJ75 from Venezuela.
I was thinking that a 4.5 gazoline engine produces more heat than a 4.2 Diesel since it's smaller and more efficient than the gazoline one! So I guess the radiator could also be better than the 1HZ stock one right?
Anyone knows if this would fit my car with 1HZ and stock viscou clutch/fan?
 
Hi all,

First off, I'd wonder whether the inlet hose is in the same spot on a 1FZ radiator vs. the 1HZ radiator. Second, I also question whether the 1FZ petrol (gasoline) engine would produce more heat than the 1HZ, since the diesel engine operates at much higher pressures.

Regards,

Alan
 
Looking on google pictures the hoses look to be at the same location BUT don't know about the viscous fan and shroud!

The higher the compression on a gazoline engine, the more efficient (and more power) it has! I guess it's the same for a Diesel and that's one of the reasons why it's more efficient (producing like that less heat)
That's why I guessed the 4.5 gazoline produces more heat than a 4.2 Diesel?
 
Hello,

After checking the EPC, it turns out that the same radiator is used for both FZJ7x and HZJ7x Cruisers.

Just my 2 cents.





Juan
 
Blade said:
On another thread I wrote that I am having big overheating problems here in Ecuador.
I just can't get rid of the idea, that my 2 year old australian copper radiator is crap... Here the only 7series I see are the FZJ75 from Venezuela.
I was thinking that a 4.5 gazoline engine produces more heat than a 4.2 Diesel since it's smaller and more efficient than the gazoline one! So I guess the radiator could also be better than the 1HZ stock one right?
Anyone knows if this would fit my car with 1HZ and stock viscou clutch/fan?
Click to expand...
hzj79 radiator will fit, and it is better
 
Hi Blade.
You can make them fit. The top outlet is at a steeper angle , thats ok. The shroud has different mounts but it can be made fit and it has a nother small outlet in the top tank , just block it off.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom