What is the center bore on my 80? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 11, 2006
Threads
23
Messages
163
I have a 91 FJ80... whats my center bore size? I searched for it and couldn't find it. Thanks.
 
If it's the same as the '94, I believe they are actually 106mm. The wheels I just installed are 108mm (about 4 1/4")
 
That would make sense... The spacers I put on my 80 were 108mm and it was impossible to perfectly center them to get them to balance. 2mm can make a difference!
 
Thread from the dead, but I wanted to log my measurement on my LX450 (1997) hub bore since theres plenty of back n forth on this between 106 or 108.
It IS 108mm. ;) 108mm
 
FZJ 80 Wheel specs

Bolt pattern 6 x 5.5”, 6 x 139.7mm
Stock backspacing is 4.5”
Stock Offset is 0”

Center bore is 106mm

PCD is 139.7 (stud)
Stock is 16”x 8” with Offset of 0mm
 

Users who are viewing this thread

Back
Top Bottom