Looking for a U-bolt flip kit. Does anyone but Marlin's sell them? I have one from Marlins and the spacing to fit around the springs are too narrow.
U-bolt Flip Kit for SOA
- Thread starter Fourrunner
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
since i've never thought to do my 60 soa, i've never looked, but when i soa'd my 40, i didn't need a ubolt flip kit...just put them upside down.
why don't you try 40 series plates, no shock mount, but the holes will be in the right spot.
i think Man-it-aint-free has flip kits for SUA 60. don't know if it would work for SOA.
don't know if your truck is currently SOA, but check out the tech links for some really good ideas.
or you could always search
hth
crusty
i think Man-it-aint-free has flip kits for SUA 60. don't know if it would work for SOA.
don't know if your truck is currently SOA, but check out the tech links for some really good ideas.
or you could always search
hth
crusty
Heres a shot of using the 40 series plate with some "custom" u bolts. I just had them bent up at the local spring shop.
they work well
they work well
http://www.off-road.com/toyota/tech/fj60springover/ this was the one i was thinking of.
btw dude.... your ride gives me wood.
crusty
btw dude.... your ride gives me wood.
crusty
crustyBJ60 said:
ya, it does that.
My g/f tells me as long as I am alone and I don't tell her about it...it's OK
the dude....is that one of those new invisble 3rds ive been hearing so much about...
just order to sets of rears from ccot...and drill some holes in some 1/4 plate.
just order to sets of rears from ccot...and drill some holes in some 1/4 plate.
LOL
ya, just send me $1500 and tell me what gear ratio you want in it...and it comes with a locker...I am sure you will be happy when you get it in the mail. Oh, and it weighs almost nothing so don't be surprised if the box feels empty.
it's a real bitch to install as well.
rear u-bolts work fine for up front. Just remember to try and not re-use them....buy new ones.
ya, just send me $1500 and tell me what gear ratio you want in it...and it comes with a locker...I am sure you will be happy when you get it in the mail. Oh, and it weighs almost nothing so don't be surprised if the box feels empty.
it's a real bitch to install as well.
rear u-bolts work fine for up front. Just remember to try and not re-use them....buy new ones.
haha....helped a red neck off the road today with one of those so ill pass..
he dint have a 3rd in and was running in front wheel drive...whole tire and axle shaft fell off while driving..helped him put the 39inch bogger on and get it off the road...
........red necks....
he dint have a 3rd in and was running in front wheel drive...whole tire and axle shaft fell off while driving..helped him put the 39inch bogger on and get it off the road...
........red necks....
mmmm... buy some plate and build your own. if you look at the man-it-aint-free set up, it really is simple.
if you surf and search a little, you will fine more than enough pics and info to build your own.
happy fab'n
crusty
if you surf and search a little, you will fine more than enough pics and info to build your own.
happy fab'n
crusty
89's rule, I'm assuming you're tryin to flip cause you're getting the shock mounts torn up on rocks etc. I bought the U-Bolt Skidplates from SOR. Not a bad price for 3/16" steel with replacable shock posts. Just something to think about...
Chris
Chris
......dude that's the cleanest one i've ever seen....