- Thread starter
- #21
These are the last photos of the truck all in one piece
Builds TYettie's 95 HDJ81 Build
- Thread starter TYetti
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #23
It's been about a month, I've been dealing with insurance, the truck is sitting in my shop, I've been shopping around and have a potential 80 series in the works
- Thread starter
- #24
Ok so insurance is all settled, finally and I have acquired another 80 series but first
I ordered new tires, one of the Dick Cepek MT's I had on the KMC grenade wheels as wrecked in the accident and they're too worn to put jus one new tire on
Went with Cooper Stt Pro
Then we cannonized the 90 HDJ81 on the shop wall
Started stripping the immediately usable parts off the 90
I had to remove the damage fender to get the door to stay open so I could start pulling some wiring out that I needed
I ordered new tires, one of the Dick Cepek MT's I had on the KMC grenade wheels as wrecked in the accident and they're too worn to put jus one new tire on
Went with Cooper Stt Pro
Then we cannonized the 90 HDJ81 on the shop wall
Started stripping the immediately usable parts off the 90
I had to remove the damage fender to get the door to stay open so I could start pulling some wiring out that I needed
- Thread starter
- #25
It's at this time I would like to introduce my newly acquired 1995 HDJ81 with the 1hdft and auto transmission. This truck had one owner in North America a military man who took meticulous care of it.
Day 1
Day 2
I started the mods right away, as the following weekend we had a 1000km trip to hit, I added my prinsu roof rack and tepui kukenam ruggedized
Then the Razor Back 4x4 seat covers and Sand Grabba floor mats
After knocking the trip to Williams Lake BC and back out of the park. The truck's performance was flawless and I'm really enjoying the 24valve 1hdft it feels extra smooth compared to the 1hdt. I went ahead this weekend and added the wiring for my ARB Zero fridge and took off the horrific bush bar light combo. My flashlight is brighter.
My next project will be to swap over the suspension from the 90, and get the 35s on this thing, but not before a camp trip
Day 1
Day 2
I started the mods right away, as the following weekend we had a 1000km trip to hit, I added my prinsu roof rack and tepui kukenam ruggedized
Then the Razor Back 4x4 seat covers and Sand Grabba floor mats
After knocking the trip to Williams Lake BC and back out of the park. The truck's performance was flawless and I'm really enjoying the 24valve 1hdft it feels extra smooth compared to the 1hdt. I went ahead this weekend and added the wiring for my ARB Zero fridge and took off the horrific bush bar light combo. My flashlight is brighter.
My next project will be to swap over the suspension from the 90, and get the 35s on this thing, but not before a camp trip
